We are supposed to take delivery next month of our 257 Fisherman. I’m looking for suggestions on adding a few rod holders forward and also an extra pair along the gunnel for trolling. Any suggestions? Thx
Looking to add rod holders on my new Fisherman 257
- Thread starter 1st8Eer
- Start date
Chessie246G
Well-Known Member
- Joined
- Oct 31, 2021
- Messages
- 301
- Reaction score
- 104
- Points
- 43
- Age
- 47
- Location
- Maryland
- Model
- Explorer
Just because I'm OCD, I'd call Grady and find out who made the factory installed holders.... a new boat they would need to match. 
I think they use Lees
I think they use Lees
Lee's Tackle - finest quality:.
Clamp on, flush mount, side mount, and swivel base types.
I added 4 clamp on mounts forward and aft on hard top frame tubing 9 years ago. Zero evidence of corrosion, pitting or staining with regular fresh water wash down
Clamp on, flush mount, side mount, and swivel base types.
I added 4 clamp on mounts forward and aft on hard top frame tubing 9 years ago. Zero evidence of corrosion, pitting or staining with regular fresh water wash down
Lee's Tackle
Lee's Tackle, Outriggers, rod holder, Fighting chairs, rigging kits, swivel base, welded bar, clamp on rod holder, rods and reels, rod racks, reel hangers, butt extender, backing plates, stainless steel, Aluminum, Brass, wishbone, Jr's, carbon fiber outriggers, fiber glass, pilot chair, helm...
store.leetackle.com
Last edited:
SkunkBoat
GreatGrady Captain
- Joined
- Oct 12, 2017
- Messages
- 4,717
- Reaction score
- 1,663
- Points
- 113
- Location
- Manasquan Inlet NJ
- Website
- www.youtube.com
- Model
- Express 265
They aren't Lee's , they have a GW cast into themJust because I'm OCD, I'd call Grady and find out who made the factory installed holders.... a new boat they would need to match.
I think they use Lees
I'm the opposite. I don't give a rats ass if it says GW.
Lee's and Tacos and Smith are all good. Gem Lux with the big nut are really nice. With no screws they give you more wiggle room in a narrow gunnel
Both my current Grady and previous 265. I added additional lee rod holders. They are basically look like Grady holders except they don’t have the Grady logo. I added an additional 15 degree between the original 2 on the gunnel. Additionaly 2 clamp ons on the hardtop legs angled out for drifting.
Nice! I’m leaning toward adding one 15 degree on each gunnel. I do wis the t-top had a couple angled rod holders for drifting….