Marlin transducer flats

MA208

Well-Known Member
Joined
Mar 13, 2011
Messages
192
Reaction score
18
Points
18
Anyone know dimensions of the rear transducer flats on a Marlin? Mine is a 2005 and looking to upgrade over the winter.

Have a big through hull already installed in the forward bilge that I don’t really want to pull out. It died so looking for a different spot.
 

REBThunderroad

GreatGrady Captain
Joined
May 1, 2007
Messages
109
Reaction score
5
Points
18
Age
57
Location
Clermont, FL
Did you find out the dimension? I have a 2005 as well. Im looking to install another transducer on teh port side with more power. I run an airmar B744v on starboard side with faring block.- 600Kw it reads at all speeds. Looking for more power and flush mount transducer for the other side. Let me know if you have any advice on a transducer that may work?
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,496
Reaction score
1,161
Points
113
I'm going to say 6" X 10" based on what I recall.
 

TortugaBob

GreatGrady Captain
Joined
Nov 16, 2018
Messages
99
Reaction score
31
Points
18
Location
South Texas
Model
Marlin
I have a 2005 also, they are big enough for the large 3-3/4" in hull B175 Airmar ducers. I have one on each side 20 deg angle. They are great, hold bottom at speed. 6 x 10 sounds about right.
 

REBThunderroad

GreatGrady Captain
Joined
May 1, 2007
Messages
109
Reaction score
5
Points
18
Age
57
Location
Clermont, FL
OK Thank you. I have the smaller b744V holds at all speed but want more power/better read.

So I need 20 degree angle B175 airmar for the flat? Do you remember where you mounted it on the flat - middle, front, etc...? What king of sounder are you using? I appreciate your help.

Rob
 

MA208

Well-Known Member
Joined
Mar 13, 2011
Messages
192
Reaction score
18
Points
18
Thanks, boat is on the hard now and wrapped. I can see the outside dimensions but not internal.

Just for clarity we are talking rear flats for the B175? Not the midship bilge area under the aft bunk?
 

REBThunderroad

GreatGrady Captain
Joined
May 1, 2007
Messages
109
Reaction score
5
Points
18
Age
57
Location
Clermont, FL
Yes the rear flats on both sides of the bottom of the boat that GW dedicated for a transducer in their design. However there is a flat inside the bilge as well where the transducer comes through as I recall...and where it bolts up.
 

drbatts

Well-Known Member
Joined
Nov 30, 2008
Messages
791
Reaction score
164
Points
43
Location
CT
Model
Express 305
Any reason particular reason you don't want to just replace the broken transducer with a new one? Or are you planning on doing that and adding a second transduce?
 

REBThunderroad

GreatGrady Captain
Joined
May 1, 2007
Messages
109
Reaction score
5
Points
18
Age
57
Location
Clermont, FL
My B744 works great...it only 600W so I want o add a second that will give me better definition at greater depths. I will just switch back and forth.

I don't want to add another faring block so that's is why I'm looking at the flush mount. I think the 175M may be the one...
 

MA208

Well-Known Member
Joined
Mar 13, 2011
Messages
192
Reaction score
18
Points
18
Same here, I’ve got a big dead transducer and fairing block in my mid bilge area. Don’t want to deal with having it removed as it’s a big hole. I think B 175 in the rear flat is the answer. Going to my Raymarine Axiom
 

TortugaBob

GreatGrady Captain
Joined
Nov 16, 2018
Messages
99
Reaction score
31
Points
18
Location
South Texas
Model
Marlin
Rob, yes, 20 deg, and I believe the Grady Dealer put in the middle. I am running Lowrance HDS Live Units, been very happy with the Navico stuff, but saved a few bucks from Simrad. the 1000 watt will be better, BOE talked me into the High & Wide and it is great B175HW. Depending on your depth of course.
 

gbgrady208

Well-Known Member
Joined
Jul 25, 2021
Messages
52
Reaction score
12
Points
8
Age
63
Model
Marlin
I attached the measurement drawing that my dealer made for me on my 2021 Marlin. I ultimately put in the following transducer in the flat and have been happy with the results and how it performs: GARMIN # 010-01966-10 GT51M-TH THRUHULL MOUNT TRANSDUCER
 

Attachments

  • Marlin Transducer Flat Measurements.pdf
    308.5 KB · Views: 41

MA208

Well-Known Member
Joined
Mar 13, 2011
Messages
192
Reaction score
18
Points
18
Thanks for the drawing. That’s very helpful
 

REBThunderroad

GreatGrady Captain
Joined
May 1, 2007
Messages
109
Reaction score
5
Points
18
Age
57
Location
Clermont, FL
Rob, yes, 20 deg, and I believe the Grady Dealer put in the middle. I am running Lowrance HDS Live Units, been very happy with the Navico stuff, but saved a few bucks from Simrad. the 1000 watt will be better, BOE talked me into the High & Wide and it is great B175HW. Depending on your depth of course.
Thank you!
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,138
Reaction score
1,435
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
Not sure who I'm responding to ...maybe a mix of people

The old B744 is not CHIRP. If you have an old sonar it might not transmit CHIRP so a B175 would be a waste.

Assuming you upgraded the sonar to a modern CHIRP model. B175 is CHIRP which will let you use the features of your sonar. The B175 is a single element transducer.
You could possibly use a B265 or B275 on the flat without a fairing (the fairings are 22" long). They are dual element transducers

If your sonar has sidevu/sidescan feature it will not function without a scanning transducer compatible with your sonar unit. Those are best mounted on the keel (centerline) without a fairing. Mounting them on the flat will block one side of the side scan.
 

mleads310

Well-Known Member
Joined
Apr 6, 2016
Messages
271
Reaction score
40
Points
28
Location
Brooklyn NY
Model
Sailfish
Just for reference if this helps. I replaced a b744 with a b765hl on my 2001 sailfish transducer flat, no fairing (wouldn't fit). The b744 held at all speeds and the b765hl holds till about 30ish maybe 35mph. I also installed a pair of rv220 in the aft bilge connected to my axiom pro.