Need help identifying a switch (no longer work)

A

agoltz

Active Member
Joined
Oct 19, 2009
Messages
39
Reaction score
5
Points
8
Location
Key Biscayne, FL
Hi there, the two interior switches of the 2012 Freedom 335 no longer work (they move but neither the light or fan turn on - and Im pretty sure its the switch).

Picture attached. Does anyone have a link - ?

Many Thanks in Advance


IMG_3960.jpeg
 
I doubt it’s the switch. Before you try to replace the switch, pull the switches out jumper the wires and see if the light and fan go on.
 
Yes, it could be the light, but if I move the switch about 20X one of those it will turn on, makes me think its more the switch and not the light or fan. Would be very strange both devices (fan and light) died at the same time.

Again - just looking for the switch info.
 
Its probably a loose connector on the switches. Or a loose connector in the light/fan fixture.

It looks like 2 rocker switches. Maybe its two push switches. Its not likely at all that both went bad at same time. Usually if a rocker goes bad it gets crunchy or it doesn't click into either position.

To change a switch you have to remove it. You have nothing to lose and evrything to gain by removing the switches now and looking at them.

At the very least you see the type of switch they are and maybe a part#.
 
Pull switch out and spray with contact cleaner, then test with an ohmeter. Replacing parts without testing can get expensive, those switches on my 2007 330 still work fine. They are not complex.
 
You must log in or register to reply here.