need to replace caulk behind transom seal

R

rcgtsport

Active Member
Joined
Jul 27, 2010
Messages
30
Reaction score
0
Points
0
Location
mystic island nj
on my 84 offshore i need somthing to seal sides of plywood that is in the transom seal hole. orig there was chalking that was cracked so i removed it and tried to fiberglass it. it got soaked in hur sandy and softed it. i was able to pull it all off in one piece (not preped right?). is this the best for it or should i use chalk or some kind of two part epoxy?
 
Re: need to replace chalk behind transom seal

is it unclear? its the thick part of transom were you can see the sides of plywood. plywoods dried out now and is hard.
 
Re: need to replace chalk behind transom seal

You're saying chalk. Like what you write on a blackboard with. I assume you mean caulk. What hole are you talking about? Is it from something that was mounted on the transom? Or, is it where the outdrive is mounted?
 
Re: need to replace chalk behind transom seal

rcgtsport said:
it got soaked in hur sandy and softed it.
Click to expand...
Also, I have no idea what this is supposed to say. I think preemptive text might have messed you up here.
 
Re: need to replace chalk behind transom seal

yes caulk. it's the whole opening the transom boot covers. pics would be better but cant them to work. i am replacing transom seal and resealing upper gearcase,tilt case,ball gears.
 
You must log in or register to reply here.