We purchased our first GW this summer - a 280 Marlin. Its been at the house mostly (trailered) for some maintenance & fix-ups, but we did have it out on the water locally for a shake-down and renaming party. So far, we love the boat and are looking forward to the next time out.
Thanks to many good posts on this and other sites like it as well as being generally handy already, I've been able to figure out most everything as I go along. But, there are a couple questions I can't find answers to, so I thought I'd post them here to see if anyone else could help me out.
1. How do I remove the microwave oven without taking the whole cabinet apart?
2. I'm replacing the original 40 Amp/4 Channel Guest charger. What new chargers are you folks using that you like?
3. If I install a large inverter such as the Xantrex Freedom series, where is a good place to put it that it won't get wet or be a potential hazard?
Thanks in advance for the replies.
Thanks to many good posts on this and other sites like it as well as being generally handy already, I've been able to figure out most everything as I go along. But, there are a couple questions I can't find answers to, so I thought I'd post them here to see if anyone else could help me out.
1. How do I remove the microwave oven without taking the whole cabinet apart?
2. I'm replacing the original 40 Amp/4 Channel Guest charger. What new chargers are you folks using that you like?
3. If I install a large inverter such as the Xantrex Freedom series, where is a good place to put it that it won't get wet or be a potential hazard?
Thanks in advance for the replies.