New Switch Panel
- Thread starter '84Offshore
- Start date
New Panel
Nice Job
I plan to do mine this year also, where did you get the panel material ?
Is it metal or plastic ?
Thanks
Nice Job
I plan to do mine this year also, where did you get the panel material ?
Is it metal or plastic ?
Thanks
Thanks.........it's 1/4" plexiglass.
I actually found it locally here on Long Island....guy gave me a pc for free, the backing was stuck on, I was able to scrape it off the small pc w/ no problem.
And I found a good source for the switches/fuse holders on ebay.
I actually found it locally here on Long Island....guy gave me a pc for free, the backing was stuck on, I was able to scrape it off the small pc w/ no problem.
And I found a good source for the switches/fuse holders on ebay.
This is the panel that i made for my other boat. Is made with 1/2" black starboard and routed behind where the switches are to 1/4" thick.
mayerial
That looks good also, I was wondering whether to use plexiglass or starboard or aluminum. Starboard was my first choice, but some people say it shrinks. I would think that a thick pc would do fine.
Whenever, I get around to tackling the project, I`ll post pics
That looks good also, I was wondering whether to use plexiglass or starboard or aluminum. Starboard was my first choice, but some people say it shrinks. I would think that a thick pc would do fine.
Whenever, I get around to tackling the project, I`ll post pics
Someone on here used a local trophy shop to make a panel. They engraved the labels and everything. Not sure what it cost, but it looked sweet.
If you go to a local trophy shop with a laser they should be able to cut out a panel for you custom fit. It will look like it came from the factory.
They should be able to laser out the holes for the switches and wording.
My son did mine for my flush mount 4208 Garmin
They should have a color you want and are UV resistant.
They should be able to laser out the holes for the switches and wording.
My son did mine for my flush mount 4208 Garmin
They should have a color you want and are UV resistant.
That is what i did, i made all the cuts my self and took it to my cousins place(engraver) and he did the lettering for me.
The engraver should be able to make the cuts also if he has the right laser. The custom lettering will look great!
OFFSHORE and NOTHING ELSE both of those look great.
OFFSHORE and NOTHING ELSE both of those look great.
Outstanding!
84Offshore! Hello again! Excellent Work! Not everyone can maintain their own boat in the fine manner that you demonstrate. The quality of your work speaks for itself! 8)
84Offshore! Hello again! Excellent Work! Not everyone can maintain their own boat in the fine manner that you demonstrate. The quality of your work speaks for itself! 8)