Off Shore Pedestal seat
- Thread starter ny-al
- Start date
I don't understand what part you are referring to.
The major components are the seat, the seat swivel/slide, the pedestal post , and the pedestal base. On many Gradys the pedestal and base are one part.
The major components are the seat, the seat swivel/slide, the pedestal post , and the pedestal base. On many Gradys the pedestal and base are one part.
Attachments
Uncle Joe
Well-Known Member
- Joined
- Aug 15, 2017
- Messages
- 420
- Reaction score
- 152
- Points
- 43
- Location
- Jamaica Bay, NY
- Model
- Offshore
I replaced both seats on my 1982. I used these
https://www.amazon.com/gp/product/B0053HQ3B0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I removed the original brackets. I had to leave the passenger side bracket under the seat base....couldn't get it out through the access hole and didn't want to cut a larger one.
Then covered the holes with a piece of marine grade 3/4 ply.....sealed all around with 5200 and screwed down. Then through bolted the new seat bases.
Worked for me.
https://www.amazon.com/gp/product/B0053HQ3B0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I removed the original brackets. I had to leave the passenger side bracket under the seat base....couldn't get it out through the access hole and didn't want to cut a larger one.
Then covered the holes with a piece of marine grade 3/4 ply.....sealed all around with 5200 and screwed down. Then through bolted the new seat bases.
Worked for me.
I would replace the pedestal and base but you will need to check if you have enough space to mount a round base. I can't tell from the pictures. If not you will need to get a 'flat' sided base that has one flat edge so that it can be mounted towards the edge of the seat locker.
Here is an example
springfieldmarinescratchanddent.com
Here is an example
2-7/8" Series Mainstay Power Rise Adjustable Pedestal w/Flat Side Floor Base (34-SLS30C) (1-SLS31D) (DISCONTINUED)
springfieldmarinescratchanddent.com
