OX-66 Trim/Tilt is dead!!

[Gary M]

Port engine trim/tilt motor will not run from any of the three switches. Engine starts so it's not the battery. When I push the DN side of the switches I can hear a "click" but only then.

Ideas or suggestions?

Thanks in advance.........

 

[ctcbtr]

Probaly inop motor, sometimes while holding switch you can smack motor with hammer to make it run to conferm

 

[Gary M]

After much trouble shooting and a call to Yamaha Tech Support, my mechanic found the relay to be dead.....so that was great news!

 

[Gary M]

New relay went in and she ran like a champ! :dance