Question: Replacing wiper arm for 2012 335 Freedom - part #?

A

agoltz

Active Member
Joined
Oct 19, 2009
Messages
36
Reaction score
5
Points
8
Location
Key Biscayne, FL
Hi Folks
My wipers have died - and the Grady Dealer said they could not find a part number. Anyone have any suggestions? Im thinking its Marinco Pantograph Wiper Arm - Stainless Steel w/Spray Adjustable 26"-30" 33096W

See pictures below

Thanks

Alex





IMG_2024.jpegIMG_2025.jpegIMG_2026.jpeg
 
I don't know if this will help, but here goes. A year or two ago, I was looking for a couple of parts for my 2011 307 Freedom. Somewhere along the way I found, or someone shared with me what they called a "2012 Parts Manual" for Grady's. Upon looking in here, it has the parts list for the 307 and many other models. So, I found what I needed.
I looked in here, and for some reason the 335 is not included. Perhaps what they shared was only a partial manual. They do have the larger (330, 336) Express and Canyon in here. So, maybe the wipers are the same in that size range. I tired to upload the full manual, but it says the file size is too big. Here is the page for the 336 Canyon.
I hope it helps!

1741712668406.png
 
Thank you! Yes that is strange that its not in there, but the idea is that the wiper seems to be adjustable in the 15-20" range (and wet which are the wiper jets) - the ones I had posted are bigger, but AFI Marinco. has smaller ones - ill look again. (the ones listed say PVC)

The ones I see are 12-17, 17-22, and the above mentioned much larger one.

I'll have to go measure it on th boat. (Hopefully its not a custom job)

This is helpful - thank you.
 
I've posted the parts manual a couple different times in various different threads. They've only got a few years of boat parts manuals on the RNR Marine website, and sadly don't have every single year. I think the most important question would be how long are the wiper arms that are currently on your boat? I imagine if the originals are 15"-20" and can't be found online, they've likely been replaced or have since been discontinued and the 17"-22" ones are likely the solution. Unless your current wiper arms are set at a length of 15", of which the 12"-17" would probably be the winning ticket.

 
You must log in or register to reply here.