Have a 265 does anyone know how to remove black hinges from radio box? One broke I see two screws where cover was over them.
Radio Box Hinges
- Thread starter Bob Meola
- Start date
There are two covers each on the hinge that pries off and exposes the screws underneath. There should also be nuts on the back of the door that you will have to hold while you unscrew
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,232
- Reaction score
- 1,344
- Points
- 113
check out southco. I believe they make a bunch of the hardware.
https://www.southco.com/static/JDrawing/j-c6-200.pdf
https://www.southco.com/static/JDrawing/j-c6-200.pdf
I have a new 23' Gulfstream and my radio box doors do not stay open when in ocean conditions. Previous Gulfstream had plastic straps that attached to the roof but new doors have hinges that are supposed to stay open...but they do not...at least not on my boat. Any suggestions? Thanks!
If the hinges are Southco they don't work that way. Assuming they used to work, the springs and pins that press into the detents are shot. The detents are what holds the hinge at specific positions. There are several model each with different detent positions.
Look at Fishtales link posted earlier in this thread.
You may want to post a new thread since this one started 4 years ago.
Look at Fishtales link posted earlier in this thread.
You may want to post a new thread since this one started 4 years ago.