Please let me know how to remove this bulkhead cushion on the port side of my sun platform on a Freedom 235 for repair.
Many thanks
Many thanks
Removing bulkhead cushion for repair
- Thread starter swsagman
- Start date
Hookup1
GreatGrady Captain
- Joined
- Oct 16, 2007
- Messages
- 3,409
- Reaction score
- 973
- Points
- 113
- Age
- 70
- Location
- Cape May, NJ
- Model
- Islander
Most GW cushions are hung on metal brackets like a picture hanger. The bottom edge on the cushion is secured with screws or snaps. Run a plastic card tucked up under that edge to feel for the hardware.
Thank you! I haven't been able to find screws at the bottom of the cushion. (A few other posts suggested that I'd find them). Do I need to pull the bottom of the cushion away and then pull the cushion straight up?
I found the screws with a short phillips head screwdriver inserted into the weep holes at the bottom of the cushion. Once the screws were unscrewed the backrest lifted off easily. Thank you,
