I HAVE A 1994 252 SPORTBRIDGE, AND ATTEMPTING THE LAST 4 HOSE REPLACEMENTS,FLOOR DRAINS AND THRUHULL SCUPPERS. FIRST OF ALL , WHAT A DUMB SET-UP, SO WITH THAT SAID I'VE TAKEN OUT THE LIVEWELL TO GAIN ACCESS TO THE PORT SIDE. ONE SCUPPER OUTLET HAS A 90 THREAD ON ELBOW THE OTHER (REAR) IS STRAIGHT WHICH APPEARS TO HAVE HAD STRAIN ON IT SINCE IT WAS PUT ON IN THE FACTORY, (THAT ONE FELL OFF IN MY HANDS WITH A LITTLE TUG) ! OK SO THE PORT SIDE CAN BE DONE, DOES ANYBODY HAVE THIS EXPERIANCE BEHIND THEM? VERY TIGHT VERY CRAMPED! PART NUMBERS, (I'M NOT THINKING BRASS OR STAINLESS BECAUSE OF THE COST) GRADY GAVE ME THE ORIGINAL PART#S BUT SAID THEY ARE NO LONGER AVAILABLE FROM THEM .THE STARBOARD SIDE I WAS TOLD ,AND THEY GAVE ME A PICTURE WHERE TO CUT A 5 OR 6 INCH HOLE TO GAIN ACCESS FOR BOTH FLOOR DRAINS ,HOSE REPLACEMENT AND SCUPPERS. HAS ANYBODY COMPLETED THIS PROJECT? I WOULD LOVE PICTURES OF THE COMPLETED JOB HOW IT WAS DONE AND HOW MANY PINTS OF BLOOD IT TOOK. WHAT EVER YA GOT I'D APPRECIATE!
REPLACING SCUPPERS ON 1994 252 SPORT BRIDGE
- Thread starter LOBSTERGUTTS
- Start date