Stainless Steel Bimini off a 2005 Grady White 225

Backwaters

Backwaters

Active Member
Joined
Aug 4, 2023
Messages
27
Reaction score
2
Points
3
Model
Tournament 225
Stainless steel frame is in great shape. Navy blue sunbrella fabric is perfectly usable but showing age.
Comes with a boot (zipper cover) and rear support rails

Replacing as we wanted a bigger cover (this one is designed to cover over the consoles, not bow or stern too)

Price: $150

D. 90” wide, 62” long, 52” tall

Located in Charlotte but can break down and ship.
 

Attachments

  • IMG_3935.jpeg
    IMG_3935.jpeg
    2.2 MB · Views: 12
  • IMG_3936.jpeg
    IMG_3936.jpeg
    2 MB · Views: 10
  • IMG_3933.jpeg
    IMG_3933.jpeg
    2.2 MB · Views: 11
Might be interested , need to measure a few things and get back to you . Thanks
 
Sounds good, and let me know if you have any questions.
 
What is the width between the forward mounting points on the Bimini? Did this mount outside or inside the windshield?
 
The width between the mounting points is 90", and it mounted on the outside of the windshield.
 
Boat is an 06 with outside mounting points, but the Bimini is a VERY tight fit. I assume it was replaced at some point with a Bimini from an 07+ that mounted inside the windshield.
 
At least that’s my theory based off of Boattrader listings.
Need a few more posts before I can PM you
 
You must log in or register to reply here.