I have a 1996 escape and was trying to locate a center cap for the steering wheel. I measure the opening at 2 5/16 but only see replacement covers at 2 1/8 or 2 1/2. Grady white no longer supports this. Any ideas?
Steering Wheel Cap
- Thread starter MRB
- Start date
Parthery
GreatGrady Captain
I had the other issue....my '99 seastar helm has an opening somewhere around 2 1/8" ID. I eventually found one on eBay. The other option is buy the 2.25 and shave it down.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,252
- Reaction score
- 1,346
- Points
- 113
Here is one for 2 1/8" that I bought:
https://www.go2marine.com/Small-Stainless-Steel-Cap-For-310-410-Series_2
Here is one for 2 7/16":
https://www.go2marine.com/Plastic-Steering-Wheel-Center-Cap-For-150-and-170-Series_2
I have yet to see a 2 5/16", but haven't looked too hard either.
https://www.go2marine.com/Small-Stainless-Steel-Cap-For-310-410-Series_2
Here is one for 2 7/16":
https://www.go2marine.com/Plastic-Steering-Wheel-Center-Cap-For-150-and-170-Series_2
I have yet to see a 2 5/16", but haven't looked too hard either.
Thanks. They look even better in person. Quality seems impressively good, especially for the price. I'll let you know in 5 years if it holds up!