tool kit and spare parts for 282

[wdlfbio]

I'm trying to get a pretty good offshore repair kit together, tools and all. Adding a toilet boil wax ring to plug any big holes in the hull. Thinking I should have a few spare hoses, fuel lines, hose clamps. I'm wondering what lengths and diameters y'all recommend

 

[sluggoe]

call grady cust service.....i did, and they gave me the dimensions of all thru-hulls on board to select clamp / hose sizes;

also, tru-plug is a good product to have although relatively expensive vs. a nerf football;

--slugg

 

[ahill]

Get some tapered wooden plugs available at most marine supply stores.

 

[grady23]

Get wooden dowels cut about 6' in length and the correct diameter with at least 1 for each thru-hull.
A small hammer and your ready to seal up a failed thru-hull.
I have twins so I carry a full set of six(6) spark plugs. The tool box has combination wrenches and sockets for everything from 8mm up to 17 mm. Also a small and large crescent wrench. Some super glue, gasket making material or sealant. A various selection of spare screws and screwdrivers. Channel lock pliers and vice grips. Add in some 14 GA and 16 GA wire and you can fix almost anything.