Tournament 19 Helm Seating Replacment

[tournement19y150]

Looking to replace the seating for my boat. Went to my local Grady dealer and saw the new freedom 255 with power sliding bench. Any idea on where to get a similar setup, *bench style, for a smaller 19 footer.

Thanks

 

[Gary S. Colecchio]

When I replaced steering with a Sea Star hydraulic, which I needed because I installed a jack plate and didn't want the cables to bind i had to change out the seats.

The problem that I encountered was that the wheel now was 6" more offset from the bulkhead with the new binacle, which made it difficult to get between it and the seat. So I had to swap it out for a tilt unit. Even then it was a tight fit. so rather than moving the pedestal back. I changed out the seats, which I hated, to Garelick bolsters and took the bolster off the drivers seat.

I like the open cockpit. So the sliding lounge like my firend has on his 275 just took up too much room. IT's really nice though, but really heavy.