I have a kink in the starboard steering hose at the fitting near the motor on my 1986 Tournament. The motor is on a bracket -- the "Grady Drive" that these came with from the factory. Any advice for fishing these under the deck when replacing them?
Also, if anyone has the correct length hose, that would be appreciated. I could take one out to measure it exactly, but I would rather not have the down-time. And, I think I will use the old hoses to pull the new hoses in.
Also, if anyone has the correct length hose, that would be appreciated. I could take one out to measure it exactly, but I would rather not have the down-time. And, I think I will use the old hoses to pull the new hoses in.