Trim Pieces

Sjhopeiu

Member
Joined
Apr 7, 2019
Messages
13
Reaction score
1
Points
3
Age
43
Location
Florida
Model
Islander
Does anyone have a good source for replacement corner covers such as the ones in the picture?
 

Attachments

  • 20191006_161221.jpg
    20191006_161221.jpg
    1.3 MB · Views: 95

igblack87

Well-Known Member
Joined
Oct 21, 2012
Messages
241
Reaction score
33
Points
28
Model
Fisherman 222
Get your bang plate replaced! Will run you about 800$...well worth not getting a soggy transom.
 

Doc Stressor

Well-Known Member
Joined
Nov 13, 2009
Messages
1,177
Reaction score
288
Points
83
Location
Homosassa, FL
Model
Seafarer
Looks like somebody did a patch job there.

You can get the newer vinyl bang plate from Grady. It's not cheap but under $100. You need to cut it into 3 pieces to make the corner junctions. They told me to seal it with 5200. I did that when I recently repowered. My transom was as dry as a bone.

You need to gets your transom checked out before just replacing the bang plate. It looks scary.
 

wspitler

GreatGrady Captain
Joined
May 16, 2011
Messages
1,306
Reaction score
289
Points
83
Location
Inglis, FL
Model
Express 330
I ordered mine from a Grady dealer, direct shipped and not exorbitantly expensive. They are specific to model.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,490
Reaction score
1,161
Points
113
I think wspitler is spot on. They are likely a custom formed part. You'll only get those from GW via a dealer.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,490
Reaction score
1,161
Points
113
Keep in mind, the pieces are cosmetic only. The key is to make sure the joint underneath is sealed and the piece (including screws) are sealed when mounting.