Underwater lights

patrick16

Well-Known Member
Joined
May 4, 2005
Messages
54
Reaction score
1
Points
8
I would like to put some LEDs on the back of my Advance 257 below the water line, but the thought of drilling holes in my transom makes me very nervous. Is there a way to attach lights without drilling?

Thanks.
 

Trout Poison

Member
Joined
Sep 11, 2009
Messages
14
Reaction score
4
Points
3
Location
N MN
I installed a drain plug LED light on my rig. The maker was FIREWATERMARINE and I purchased it off Amazon. I was very pleased with the result. No drilling, and cheap - I figured it was worth the $30 gamble to try it out, and would definitely do it again.
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,251
Reaction score
1,474
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
I have used the firewater drain plug and it worked well for a couple seasons. It was hard to reach the connector way down there in the bilge though.

Currently I have a SternPad(leftover from a transom mount transducer) with some cheap UW LEDs from ebay. Wires run thru the motorwell, over and down the transom between the motors.