Water leakage

captjimjr

New Member
Joined
Mar 28, 2019
Messages
3
Reaction score
0
Points
1
Age
60
Model
CHOOSE
I have a 1979 angler with a 120 omc and a 400 omc out drive. Got her ready for the season and after getting it running I have water coming out from the bell housing? Prop spins in forward and reverse, motor ran good( for the short time I ran it ) and didn't have any steam or anything from the exhaust. What could it be?
 
this is a site of a boat manufacturer that largely has used outboards for the past 20 years. might be better to find a better place to ask this question. just sayn….
 
May be a freeze out plug behind the flywheel
.
 
Last edited:
Anything from a loose hose to a cracked block from improper winterization. Tough to say from where I am - hard to see it. Get a mirror in there or use your phone.
 
Anything from a loose hose to a cracked block from improper winterization. Tough to say from where I am - hard to see it. Get a mirror in there or use your phone.
Thanks, haven't got into it yet was looking for a opinions. Will send photos latter