I would appreciate some advice on wiring LEDs up under the Gunnels of my 192 Tournament. I have searched online, but can't find the answer to my questions. I plan on wiring them to my accessory switch at the helm. The Grady manual for my year (1994) states that the accessory switch breaker is rated for 10 amps. My question is this, don't I have to have a fuse or breaker with fewer amps? The total draw for all LEDs will be under 3 amps. Now, I have a new Blue Seas fuse block, but I am not sure how I would wire the lEDs Into the fuse block and also tie it into the accessory switch. Is this even possible? Or could I have an inline fuse under the dash BEFORE the hot wire connects to the switch? My second question is sourcing marine gauge wire that is thinner than 20 gauge. The LED wires appear to be pretty thin/small. I can only seem to find 18 gauge and thicker. Any advice would be appreciated. Thanks!