Looking for an aft backrest bolster for a 2009 Grady-White Tournament 225.
Mine unfortunately went overboard after it was reupholstered and reinstalled by the upholstery shop without the retaining screws. The original assembly is no longer available from Grady-White.
I’m interested in a used or NOS bolster, including one from a boat being parted out. Upholstery condition is not important, as I can have it reupholstered. What I really need is the original rigid backer and the brackets attached to the backside of it. The corresponding mounting brackets are still on the boat; I am only missing the retaining screws.
If no one has one available, I’d also greatly appreciate hearing from anyone with a 2009 Tournament 225 who could provide photos and dimensions of the bolster/backer, including the location and spacing of the brackets attached to the back of the bolster, or ideally a tracing of the profile. There would be no need to take the bolster itself apart.
I’d be happy to compensate someone for their time in taking measurements or making a tracing.
Please PM me if you have one, know of a parts or salvage boat, or can otherwise help. Thanks very much.
Mine unfortunately went overboard after it was reupholstered and reinstalled by the upholstery shop without the retaining screws. The original assembly is no longer available from Grady-White.
I’m interested in a used or NOS bolster, including one from a boat being parted out. Upholstery condition is not important, as I can have it reupholstered. What I really need is the original rigid backer and the brackets attached to the backside of it. The corresponding mounting brackets are still on the boat; I am only missing the retaining screws.
If no one has one available, I’d also greatly appreciate hearing from anyone with a 2009 Tournament 225 who could provide photos and dimensions of the bolster/backer, including the location and spacing of the brackets attached to the back of the bolster, or ideally a tracing of the profile. There would be no need to take the bolster itself apart.
I’d be happy to compensate someone for their time in taking measurements or making a tracing.
Please PM me if you have one, know of a parts or salvage boat, or can otherwise help. Thanks very much.