WTB: Old style gunwale rod holders

[Wetsquirrel]

Looking for 2 of the old style angled gunwale mounted rod holders like in the pic below. Thanks, Dave

 

[glacierbaze]

Any of them can be mounted at an angle to the centerline of the boat. What vertical angle are you looking for? They are usually 15 or 30 degrees.

 

[BigD808]

I have some if your interested.

 

[glacierbaze]

I looked at mine while removing the bolsters a couple of weeks ago, and was surprised to see that the tubes were two piece, joining a few inches below the gunnel. Never seen that.

 

[Genobg]

I looked at mine while removing the bolsters a couple of weeks ago, and was surprised to see that the tubes were two piece, joining a few inches below the gunnel. Never seen that.

I have one which does not stay fastened to the mounting hardware. What is going on?

 

[Wetsquirrel]

Any of them can be mounted at an angle to the centerline of the boat. What vertical angle are you looking for? They are usually 15 or 30 degrees.

Looking for either, plan to mount them amidship.

 

[Mustang65fbk]

I actually had two that I took off my boat and replaced them with some Burnewiin brand mounts, then I shipped them to another member for the price of the shipping. Or else I'd have done the same for you, sounds like you have a few people trying to get rid of theirs though, good luck!

 

[Tunamike]

I have some if your interested.

I have some if your interested.

Do you still have any of the rod holders still available

 

[BigD808]

Do you still have any of the rod holders still available

I still have all of them available.

 

[Tunamike]

I could use 2 how much you thinking and sorry to be vague I just bought this boat someone took 2 of the holders out on starboard side and put some funky 0 degree lee holders in but it looks like it definitely had angled ones in before just hope they are the sane as yours

 

[Tunamike]

actually if the shipping is not 2 crazy i could take all 4 if you'd rather sell all 4 at once? thanks Mike

 

[glacierbaze]

Tunamike, check your messages.

 

[Tunamike]

i responded but i am not even sure just said lee and they are zero degree

 

[Jamato14]

I’ve replaced 3/4 of my stock Grady ones with swivels and have the original (2000 models) available. I’d let them go for $75/piece.

 

[Tunamike]

I’ve replaced 3/4 of my stock Grady ones with swivels and have the original (2000 models) available. I’d let them go for $75/piece.

what is your zip code so i can check shipping cost and decide if just want 2 or take all four ? thanks mike

sorry i just realized you weren't the original person that had the pictures posted need to make sure these are the LONG ones what boat are they off of?

 

[Tunamike]

sorry i just realized you weren't the original person that had the pictures posted need to make sure these are the LONG ones what boat are they off of?

 

[Jamato14]

sorry i just realized you weren't the original person that had the pictures posted need to make sure these are the LONG ones what boat are they off of?

Sorry didn’t mean to take away from the original responder. Mine came off a 2000 Grady white sailfish 272. Will be able to get pics/measurements later this week if you’re interested and the previous one doesn’t work out.

 

[Tunamike]

Sorry didn’t mean to take away from the original responder. Mine came off a 2000 Grady white sailfish 272. Will be able to get pics/measurements later this week if you’re interested and the previous one doesn’t work out.

That's fine waiting for same info from other owner and I'll be traveling till next week as well I THINK the 27 sailfish should be the long ones but all new to me

This is my first grady 16 330 so I'm learning as I go supposed to have my first ride 26th since short cold sea trial mid December getting excited

 

[Jamato14]

Here’s mine, I have 3 of these all in similar condition. Let me know if you want them, I replaced mine with deep 0* swivel holders for tuna which sounds like what you’re going to be taking out. If you’re interested I’d consider trading if they are lee 0* swivel rod holders

 

[Tunamike]

Here’s mine, I have 3 of these all in similar condition. Let me know if you want them, I replaced mine with deep 0* swivel holders for tuna which sounds like what you’re going to be taking out. If you’re interested I’d consider trading if they are lee 0* swivel rod holders

I an waiting for the first guy to measure his but I THINK these are the short 9-inch ones off a smaller grady mine are supposed to be 11 inches deep off 30 footers and up