Latest activity
-
I just got a flag pole and mount. It screwed right into hard top. -
DDennisG01 replied to the thread 226 Seafarer anchor light wire.Windshields are actually pretty simple to take apart. I highly doubt the wire is secured inside the windshield... but any sharp bend...
-
DoctorOctopus replied to the thread Flag/Burgee options.I drilled straight into the 1/2" flagpole rather than a set-screw. set screw appears to be 1/4-28 but I will double check tomorrow... -
DoctorOctopus replied to the thread Anchor light.seafarer is 22 not 23 feet long. My boat gets bigger when I talk to other boaters and smaller when I negotiate my slip fee.
-
DoctorOctopus replied to the thread Anchor light.perko sells the light. I suggest you replace the bulbs with LED. there is a bent one at the base, and another bent at the head to...
-
DoctorOctopus replied to the thread 226 Seafarer anchor light wire.I have the same issue. I am getting the feeling that pulling the wire through is impossible and that some kind of new secured wire or...
-
DDennisG01 replied to the thread Swim ladder cover?.In any of the boats that I've owned that have a ladder sticking out like that, I just avoid bumping into things :) But... if you...
-
JAnyone have recommendations to cover swim ladder while folded on boat? In the freedom 235 the ladder sticks out beyond boat and have...
-
I had mine setup using the internal GPS antenna, but it wasn’t accurate enough for my Seakeeper Ride system to work properly after... -
JRight on. I'm only down on the weekends for now. We live little over an over away. I'm usually at The Boathouse in the...
-
gw216 replied to the thread GPS Antenna ?.I had mine setup using the internal GPS antenna, but it wasn’t accurate enough for my Seakeeper Ride system to work properly after... -
SkunkBoat replied to the thread Windlass power.What size wire was on the breaker? Where did that wire come from? What size wire was on the up/down switch? What size wire connects to... -
SkunkBoat replied to the thread Motor well scuppers.its all in here https://www.greatgrady.com/threads/transom-maintenance.37746/
-
DDennisG01 replied to the thread Motor well scuppers.If the inside rim has broken off from corrosion, it's reasonable that the other side will in short time. Don't do a band-aid repair...
-
KTrying to send pics the scupper on back of transom for the motorwell.On the inside The brass piece has corroded off .Its above the...
-
