Recent content by finnaddict

good thread just did my fresh water system on a 305 express.put 4 gallons of antifreeze in and ran it thru . 2 questions.how do You get the hot water holding tank and how do You do the head? thanks

Glad to hear it went well.I would definitely like to get in on the next one.

Wanted to fish this tournament but the weather just doesn't look good

OK went down to check things out.first twisted the wires on the float switches.no reaction from the forward pump and the aft would only work if I lifted the float real fast,leading Me to believe the switches are on their way out or gone. To double check I pulled the quick connect from each float...

Rich the boat is a 2007 and surveyed in the spring,not that it guarantees there is no stringer or hull damage . Hoghunter I think You could be right and going in to tighten and check all tank connections. The water makes sense too considering I just fished 3 days in anywhere from 2 to 5 foot...

Thanks George They are the enclosed type and will head out to the boat tomorrow to check for the tube or wires to see if it goes off.Have You made the run out to montauk?I see Your from Bay shore.I've made it twice this year and love the ride and the fishing.Next year We are looking forward to...

Hey all have a 305 express that I got this year and enjoying greatly.some time around the end of august every now and then an unpleasant smell was coming from the cabin.After cleaning the cabin inside out it kept coming back,some days worse than others.I seemed to trace it back to the...

Thanks Guys

would the motor wind even if I didnt use the trim tabs that day?

Hi all have a 305 e question is everytime i turn the motor off and pull the keys a motor winds out for about ten seconds i have no clue what it is thanks

I just rinse unless it was a good day of fishing or heavy dirt build up but always fresh water the engines after every use even if im going the next day

just checked nada and the hull is valued around 4500 to 5000. If I was your friend I would have it checked out and definitely figure how much He is willing to put into it.By the time Hes done a few hundred either way for the hull is not going to matter in the grand scheme of it.

Just bought the 305 and had a 2 hour ride home .I sat most of the way and had no problem seeing the gauges.Just take the position u want to drive in and lift till u can see both.

I was talking to a salesman and he told Me to buy a knife that felt comfortable in My hands.He said buying a real expensive knife is not going to make a difference so he steered me towards a 15 dollar dexter.He also told Me the carbon based steel will sharpen easier and dull easier than a...

does anyone know what the manufacturers recommend