Best filet knife

cobrapowersys

Well-Known Member
Joined
Mar 23, 2010
Messages
118
Reaction score
0
Points
16
I would like to get some opinions on filet knives, and sharpening techniques. What is the best filet knife, and sharpening techniques?
 

Reel Sharp

Well-Known Member
Joined
Sep 1, 2009
Messages
47
Reaction score
0
Points
0
Location
Wilmington NC
Well it depends on what you are going to be filleting. Little sprat or jumbo Tuna? Make sure your knife bends how you want and hold a good edge. Not sure of the higher dollar brands but I have a Dexter($20-30) and seems to hold up fine. I can't seem to bring myself paying big bucks for a knife and have it go overboard.
 

midnight-rider

Well-Known Member
Joined
Jul 26, 2008
Messages
79
Reaction score
1
Points
0
Location
La Plata MD
My choice

I buy ones that feel good in my hand. In N.C. Outher banks Tackle shops they sell used fillet knives which have alot of life left in them for a few dollars under $5.00 each. At that cost I buy a few of them at a time and don't worry about losing them. The key in my opinion is a sharp knife that feels good in your hand. Sharping them on flat stones, roller types or those with the metal tops covering the stone all work. Learning to used them is key.
 
Joined
Mar 12, 2010
Messages
23
Reaction score
0
Points
0
Location
Washington
Forshner knives are great knife for Fish and are a snap to keep sharp. I cut up animal parts every day for a living and for filleting fish there is no better value!
 

Bama96

Well-Known Member
Joined
May 20, 2008
Messages
411
Reaction score
2
Points
0
Location
Birmingham, AL / Destin,FL
Roll the Bones said:
Forshner knives are great knife for Fish and are a snap to keep sharp. I cut up animal parts every day for a living and for filleting fish there is no better value!

X2 the Forshner is hard to beat.
 

cobrapowersys

Well-Known Member
Joined
Mar 23, 2010
Messages
118
Reaction score
0
Points
16
sharpening stones

so it seems like the good brands are dexter, and forschner neither are real expensive. How about stones? Does anyone use round vs flat, vs slider? What seems to work best?
 

Butcherboy

Well-Known Member
Joined
Aug 19, 2006
Messages
47
Reaction score
1
Points
0
Location
san diego
Ditto

Ditto to everything that Roll the Bones said. In regards to sharpening "It's easier to get them sharp than to keep them sharp". All the different sharpening methods work the key being to doing it often enough to get the knack. If you sharpen them often, you don't let them get in too bad of shape.........Tom
 

g0tagrip

GreatGrady Captain
Joined
Mar 14, 2010
Messages
407
Reaction score
31
Points
28
Location
Indialantic
fish knives

I'd go cheap, loose too many overboard, guess I fish with too many rookies. I'd ask "where is the knife?" Someone would say "Oops, it slipped out of my hand and went blub."
 

Gary M

Well-Known Member
Joined
Jun 2, 2006
Messages
475
Reaction score
10
Points
18
Location
Ft. Lauderdale
I prefer "stiff" knives....."flimsy" knives tend to leave too much meat on the bone.....

What do I know.........I've only cleaned a few thousand dolphin and yellowtail snapper......
 

finnaddict

Active Member
Joined
Feb 11, 2010
Messages
39
Reaction score
0
Points
0
Location
moriches
I was talking to a salesman and he told Me to buy a knife that felt comfortable in My hands.He said buying a real expensive knife is not going to make a difference so he steered me towards a 15 dollar dexter.He also told Me the carbon based steel will sharpen easier and dull easier than a stainless.He also told Me if I go carbon based to clean with a mild detergent and keep dry to prevent a pitting rust.He also suggested to coat the knife with spray(like pam or some other vegetable spray) between uses especially if keeping it on the boat.He did tell Me to avoid the cheap dollar store stones and buy a good one and that will make sharpening easier.I also got a good explanation on how to use the stone.I would try to explain it but think there is probably a better display on u tube. Good luck
 
Joined
Mar 12, 2010
Messages
23
Reaction score
0
Points
0
Location
Washington
The key to a sharp knife is keeping it there with lots of touch up work. I do not use flat stones because I am terrible with them. I use a diamond dust steel before or after every use, I touch them up on the steel. Not like those Hot Dog yahoos you see in restaurants on TV, Just some well angled, even deliberate strokes (careful boys) will do the trick. Also if it is a lot of animal parts, stop, wipe the blade, touch it up, and back to the work!
 

enfish

Well-Known Member
Joined
Oct 17, 2006
Messages
444
Reaction score
72
Points
28
Location
San Marcos, CA
Model
Adventure
Roll the Bones said:
The key to a sharp knife is keeping it there with lots of touch up work. I do not use flat stones because I am terrible with them. I use a diamond dust steel before or after every use, I touch them up on the steel. Not like those Hot Dog yahoos you see in restaurants on TV, Just some well angled, even deliberate strokes (careful boys) will do the trick. Also if it is a lot of animal parts, stop, wipe the blade, touch it up, and back to the work!

x2. That method works well for me too. I use a Forschner boning knife for filleting since I like the stiffer blade and it's kept its edge real well just by using the steel on it.