Recent content by hardasset16

I think that is a bit on the high side. I’d offer $25k. As far as ride, I can only say that I have a 196 Tournament and the ride is pretty good for that size and style boat.

Thanks trapper. Did you use and enlarge the existing holes, or did you cut two entirely new holes and leave the original pie plates. If you did enlarge the existing holes, what did you use to cut them out?

What size boat is it? I am more of the buy once cry once type of person. If it isn't too complicated a scheme, I would rewire it once using tinned wiring, quality butt connectors, and new fuse panels/bus bars/etc. I have a 192 Tournament, 2002 model, and am planning on doing a rewire this...

I have posted about this issue before. My 2002 Tournament 192 has very poor bilge access. Access is currently provided by two pie plates in the splash well. It is difficult to work through these. I am contemplating having a large hatch installed in their place. I haven't measured yet to...

It appears to be factory installed, wiring color (orange with blue stripe) matches what the manual says. The pump itself is brand new. I don’t think it’s a pump issue. When I first installed the pump a week ago, I turned on the washdown switch and there was a several second delay for it...

I am learning this. I replaced the washdown pump and it worked initially. HOwever, now that I have re-assembled the shower, the pump is not kicking on. Any ideas? I have tried bleeding the water lines without success. I noticed that tinned wiring was not used in the wiring of this boat, which...

The bilge access on my 192 is through two pie plates in the transom well. I am wondering whether anyone has ever replaced these two small accesses with a larger hatch, such as a bomar. Please advise.

Mine is limited to inside the starboard console, and it does seem to be more noticeable when I have had the boat covered for a while. I do think it is a potentially bad situation given the location of the fuse block and will investigate.

Well, I took it apart as suggested, removed o-rings, tumbled the internals and then soaked all internals in CRC overnight. It looks and works as news good as new. I took pictures of the disassembly. If anyone thinks worth uploading I will.

I have a new to me 2002 192 Tournament. When I open the starboard console door, I can smell fuel inside. I noticed that the fuel fill and vent run down through this compartment. I am not smelling fuel when the bilge or inspection plates are opened. Is this a problem? If so, solutions? I really...

Thank you for all of your replies. I was able to find the Scandvik model, and they refer to this as a 'transom shower.' Looks like buying new would cost ar I'll give disassembly and re-assembly a try and report back with pictures.

I just purchased a 2002 192 Tournament. The fresh water washdown was not working. I replaced the pump, which got it working, but teased out another problem. The nozzle is stuck in the spray position. This nozzle appears to be the original. Has anyone ever disassembled and repaired the oem...