Recent content by JUST-IN-TIME

What a beautiful day on the water greasy, with some lumps on the way out FAC on the way back all north of the north bar in around 80-100ft used chicken for bait 2day soak over 50 for 3 guys (at least 4 or 5 females with tons of eggs) 3 rock crab also all nice grade and lots of JUMBO's Went...

if i have to explain everything to you guys, i would be out of a job :mrgreen: give me a few and i will show all of you what and how to do it right the o2 sensor needs cleaning every 500hrs

you talking about the F 200 or the ox66? because the 0x 66 and HPDI motors have a o2 sensor plug that when it gets carbonized up it sounds like a rod knock or a sticking valve sometimes

you just add it to the helm if you still get slow response then you will need to bleed it

you email me i really do not chase anybody down, LOL

Only guys i trust Virginia CLARKSVILLE - Southside Marine & Auto, LLC EXMORE - Seaworthy Marine Services, Inc. HAGUE - Cole's Point Automotive & Marine Repair HUDDLESTON - Sherm's Boat Repair MONETA - All Seasons Marine Service, Inc. MONETA - Bridgeside Marine LLC NEWPORT NEWS -...

thats is way cool of you!

boats.net has a forum i use evinrude.com for part diagrams

some use the clamps also to ground all clamps need ground also, actually all metal

it will still be in there

i would do it every year or 100 hrs

i had to cut at least 10 out this year!! they use 2 different metals, galvanic corrosion use PB blaster and a metal punch and hammer i not cut a relief cut in the center and punch her out

you could change the steering rod to do less of a turn

New Jersey LAKE HOPATCONG - Lake Hopatcong Marine Delmont - Barnacle Bill's Marine

COOL have a good one