Recent content by Kevin Hawes

Quick question since this what I am working on—— same gauge system——- will gauge operate during fresh water rinse thru the hose adapter, my port from engine has water coming from it (hose removed) but hose to gauge, water doesn’t flow from gauge end but with a light vacuum water will flow ...

Thanks for your reply ! The info was helpful

Material I am looking at is 72 inches wide from sail rite and is sold by liner yard, they can only ship in 6 yard increments to me over here,

Has anyone replaced the hull and headliner on a 248 Voyager ? What amount of material is needed ? Getting to the end of a 1 1/2 overhaul

Manual deployment and 1998 Voyager, would like to install a pulpit but parts here are impossible to find and no one wants to ship parts here

What are the best bow rollers for a Grady White with a Rocna 10 anchor with no pulpit

Single engine twin battery wiring diagram

Does anybody know the thickness that Grady used ? Laying it out with door frames etc it looks like 1 1/4 inch to me

If needed I can take pics of my rebuilt seat with the tracks I received from Fisheries Supply

Hope this helps you

Here is a picture of the seat gibs

Fisheries Supply , The seat swivel part number TOD 9994-144 and the track bushings are TOD 9994-72

Just ordered mine from Fisheries Supply the round part that the seat swivels on is called a Todd and the track slides are called Bibbs so for 2 seats you need 2 Todd’s and 4 bibbs

I am replacing mine right now since boat is down for total boat drain and bilge and water line replacement, I am using 1/2 inch birch plywood and use laminating resin with styrene thinned and coating the plywood until it will not suck up any more then without the styrene going to apply 2 mat and...

I ordered the new fittings and they will be here soon but I found some that the elbow has one end with a 1 inch barb and the other has a flat flange that will seat on the bottom of the hole and is threaded and the drain sealing head will screw into the elbow from above into the elbow ( head has...