Quick question since this what I am working on—— same gauge system——- will gauge operate during fresh water rinse thru the hose adapter, my port from engine has water coming from it (hose removed) but hose to gauge, water doesn’t flow from gauge end but with a light vacuum water will flow ...
Just ordered mine from Fisheries Supply the round part that the seat swivels on is called a Todd and the track slides are called Bibbs so for 2 seats you need 2 Todd’s and 4 bibbs
I am replacing mine right now since boat is down for total boat drain and bilge and water line replacement, I am using 1/2 inch birch plywood and use laminating resin with styrene thinned and coating the plywood until it will not suck up any more then without the styrene going to apply 2 mat and...
I ordered the new fittings and they will be here soon but I found some that the elbow has one end with a 1 inch barb and the other has a flat flange that will seat on the bottom of the hole and is threaded and the drain sealing head will screw into the elbow from above into the elbow ( head has...
I just removed the same lines today on my 248, I figured out a way to replace them without cutting any holes, I used a 1 inch cutting disk on my pneumatic pen high speed ( or a Dremel tool ) and carefully cut the inside of the drain and once thru the downspout the sealing ring will come off and...
Talking about livewells has anyone replaced both drain lines on the port side and the 1 on the starboard side, looks like if the drain flange could unscrew then you could pull it out from under the wells ( but that would be to easy ) has anyone found an access to the worm clamps or where to...
Removed all fuel and bilge and vent and fresh water hoses, down to the last 3 hoses, 2 on port livewell and the 1 hose on the stowage/ice on the starboard side aft of the captains seat, has anyone found a way yet to gain access to replacing them
I am in the process now of replacing all my hoses ( once all hoses are removed I will take photos ) I have removed the port side hoses with little to no problems except the two hoses on the aft side of the port helm seat livewell and the two aft deck scuppers, on my 248 Voyager seems like for...