Recent content by MarbleFalcon

If the embedded nuts are already spinning in the fiberglass, I’d stop trying to force those screws before the damage gets worse. If you can get enough clearance with the seat mechanism lifted, replacing the plastic runners without removing the whole base would probably be the least invasive...

If you still have all of the original seat parts, I’d definitely try to put it back to stock rather than adapting another aftermarket setup. Before taking anything apart, I’d lay out every bracket, slider, pedestal piece and fastener you have and take a few pictures. On these older boats it’s...

That breaker would be the first thing I’d isolate. If you’re getting a noticeable spark when connecting the battery with the main switch OFF, something on an always-hot circuit is drawing current. The bilge pump may account for a tiny amount, but I wouldn’t assume it explains a persistent...