Recent content by MrD

Trilux 33 sprayed just at the angle the water sits on the lower skeg.

Awesome, I am copying the link as we speak and sending it to the fiberglass shop.

Mudwasp had a post on here that he was able to find the rub rail and insert for his boat. I have pm'd him. I have a 1988 Offshore and my fiberglass guy installed a white insert over the navy blue rubrail. I don't like the look, it marks easily, and it can be pulled out with my fingertips. He...

Mudwasp, would you happen top know the size or model# rubrail and insert that Integrity marine gave you. My fiberglass guy says the original rubrail and insert is not made anymore and gave me a white insert over the navy blue rubrail, and it looks like a$$. I know this is an older post but any...

Gentlemen, thank you all for your help. Works perfectly, tested yesterday. Btw, running power to the gauge from the toggle switch and not ignition. You are geniuses.

Yes, I understand but I like this modification previous owner must have done, this way I can see fuel capacity without having ignition on or at refueling. When the switch is down the LED lights up in the down position, when UP the led lights the up position. Also just seeing or feeling the...

Thank you all for your help. I believe I can now figure this out. I am going to use Pins 1,2,3 to run power up to the gauge, and pins 4,5,6 for the tank sending wires and 1 wire to sending input of gauge. Yes, gauge is analog. Trouble was I did not try this configuration thus was not getting a...

"fuel gauge on the dash sender" is the terminal on the fuel gauge for the sender wire. I have 2 senders, from 2 tanks, these both come to the switch, this is where I am confused, how do I send the signal to the fuel guage from the sender? Also, thank you all for the questions and help. I...

Seasick, the switch is just an amazon buy, noy sure it has a make and model, but here is the link to it and a pic of the pins schematic https://www.amazon.com/dp/B08L6BZYLL/ref=cm_sw_r_apan_i_6BZBJ0D3A9V48EGB3SX6

Hookup1, yes,sending units and gauge functioning when I wire them directly. The original was wired similary except it was a toggle switch and now I am upgrading the whole panel to rocker switches.

Can someone please explain to me what I am doing wrong? I bought a on-off-on rocker switch, double pole double throw to replace the old Grady White Main/Aux Fuel switch. Am I connecting these wires correctly to the back of the switch? Thanks for any help. The finished product looks like this:

Wow...came out great. I'm still not done with mine as I had to put in gas tanks, bow hook, and all the thru hulls so got side tracked. Glad to hear also the boat is in the water.

Hi Robert, I would like to also pressure test my bracket for leaks, can't figure out how to plug the drain and also fill with air. Can you please explain your 1/2" PVC drain plug with air valve attached. Do you have any pics of it? I know this is an old posting but anymore explanation of this...

Hi Mike: Same problem here. It seems you know what to do with the edges. See my pics. I sanded/grinded down to good material. Be sure use a respirator, safety googles, and long sleeves. Fiberglass dust is nasty, itchy, and you don't want to breathe it in. Then I used Epoxy mixed with cabosil...

Recoil Rob: I know that they used the same gelcoat, I read that here a few times, and that is a great price. I will be calling to NJ dealers to see if I can find a price like this today. I am wondering however if your glass guy still had to tint further the gelcoat to match the 2004 paint job. I...