Recent content by Ramblin Reck

Thanks Good info Tight Lines

Thanks This is what I need. I did have the year wrong! It is a 1998!

Thanks I have a 1988 Appreciate your bring that to my attention

HULL WEIGHT FOR MY 1988 GW SEAFARER WITH A BRACKET AND HARDTOP? ALSO FUEL TANK CAPACITY OF MY SINGLE TANK ( I THINK IT IS 100 GALLONS) ? THANKS AND TIGHT LINES I had wrong year manufactured!

I think the rainwater is getting into my bilge from two sources. The cupholders on the live well at the transom are probably the main culprit. That's like having a three inch hole in the deck, times two! Also the seats located at the transom are designed for water to run off onto the deck...

Rain Water enters my bilge while in exposed dry rack storage. How do I know this? Be cause the stern bilge pump kicks on when the boat is lifted up and tilded back with the Fork Lift. And we have been getting a lot of rain on the Georgia Coast! I suspect the anchor locker, the rear seats...

Survival is the key word. Congrats

Thanks Since my Bow rail already has a 1/2" hole predrilled in it, I prefer to use the staff that is held in the hole by a set screw. I feel fairly confident that by getting a longer set screw, and drilling a hole in the staff itself so that the set screw will penetrate the staff, will...

Roger that. Do you recall from where you bought it? Thanks

Go Jackets! THWg!

Wow:confused:

this is what my bow rail connector looks like

The one I am looking for mounts in a predrilled hole in the rail "connector" where the bow rail joins together in the forward part of the boat. It also has a set screw in it to keep the mast from falling out. The hole I am guessing is probably 1/2" diameter

Thanks!