Recent content by Sba

  1. S

    Flushing drains on 228 seafarer and help winterizing

    Thank guys , potty is pulled out don’t want to use it also don’t want to use fresh water tank anymore, , you advice was very helpful, I do not have a hot water heater , I just didn’t want to mess with the fresh water and porta potty every year just wanted to drain both and leave them dry...
  2. S

    Dirty arm rests

    Rusty, are you sure it’s mold , I keep my boat wet dock and had black spots over the seats , spider dropping , bought Hot shot pest and spider strip ,took care of my problem, If it’s mold I use damp rid
  3. S

    Flushing drains on 228 seafarer and help winterizing

    Thanks Legend , don’t understand about the plunger but I think you may be referring to the seacock lever you pull it up or close it by pushing it up or down like a plunger. I will go outside my boat when it is on the trailer and try to hold a pan of rv around the intakes while turning the pumps...
  4. S

    Flushing drains on 228 seafarer and help winterizing

    I have a 228 seafarer a 2007 and run a 250 yam- 9.9 kicker. Have owned it for 3 years . Stored it in heated building the first year , last 2 years unseated. No problems yet however I have a few questions if I could get some help and advice. I have been winterizing the boat myself but do not know...
  5. S

    Flush mounting electronics on a seafarer

    Thanks Parthery, I will take you advice and go with one-half inch black starboard, looks like you mounted over the entire area ,It is definitely would be stronger. do you mine telling me where you got it ,the starboard,and how much , you by chance remember what size you order, Really thank you...
  6. S

    Flush mounting electronics on a seafarer

    TC Seafarer, did you ever mount your electronics to the lip of the electric box? I am now going through this with my 228 GW , I think Strikezone idea is good and it looks professional, however I would like to have access to the unit with out having the lid up or falling down. It seems to me...
  7. S

    Would anyone be interested in having starboard work done?

    Re: Would anyone be interested in having starboard work done Need a piece of starboard to mount two 7 inch gps/sonar on my seafarer inside electronic box,, to see what I need go to the next thread page 2 electronic tip electronic and modification, flush mount on seafarer,check TC Seafarer pics...
  8. S

    best engine size for seafarer 228

    I have a 228 Seafarer 2006 , I have a 250 Yamaha 2007 could not ask for a better motor, motor has enough power to get on a plane quickly and and trimmed out to cruse at 25-28 for great gas mileage , If I need to get in quickly this boat will do 42-46 mph. Rare that I ever go that fast and really...
  9. S

    Seafarer 228 Lake Erie trolling

    Went with a 9.9 Yamaha kicker Pooderbuilt bracket, had Dubberts Marine install it , did a great job. Had them put Panther control for steering, This Jan. Panther is suppose to come out with remote throttle and steering in one remote. Pooderbuilt is out of Wa. State a guy name Dwayne has the...
  10. S

    PLEASE READ THIS AND RESPOND!!!!!

    Boat name Best of the Best Steve 2006 228 Seafarer 2007 F250 Yamaha, 9.9 Yamaha 2015
  11. S

    Mounting kicker to 228 seafarer with swimplatform

    Thanks Pete, I will continue to try Brook at Salt Boss, I even thought of calling a Grady dealer in Seattle to see if they knew how to get in touch with him , the pic are just what I need, especially under the transom for support, could not tell what the top looked like , I guess the bracket...
  12. S

    Mounting kicker to 228 seafarer with swimplatform

    Thank you gentleman for the help, Salt Boss must have gone out of business, tried e-mail, calling but was unsuccessful.they are out of Seattle, but still have their web site up. They really made a great bracket, matched color, fit perfect good reviews. Maybe I can find a used one if someone want...