Search results

I used the livewell for the first time in years for anchovies. It kept the bait alive for the 40 mile ride. Midway through trolling for albacore the bilge pump started and stopped after a bit. I discovered a flap of loose sealant at the top of the livewell. It was 2" wide. It was slopping...

Are some of the marks supposed to line up with marks on the belt? Do you have the service manual to make sure which marks line up with what? I sure wish my F250 was non-interference.

Here are your photos.

A portion of the lip is into 3/4 ply, but the edges are into a 1/4" glass. Good issue spotting. I think the glass could be served by a crimp insert. I have a kit to do that but would need to source stainless inserts. I'll use the old screws and life caulk until the season is over. Then...

Cool boat.

So I had some brass inserts to try and I practiced on 2 of them. I had a short bolt and used 2 nuts to insert them with some shop white wood glue. I left them just a bit proud. I noticed it was difficult to start them straight, a longer bolt might help. I'm too cheap to buy their install...

I think I saw your post on FB, a really nice aluminum hatch? How waterproof has that hatch been? I don't want bloody tuna water getting to the bilge.

Has anyone with an older Marlin used screw in inserts to secure the bilge hatch? I get tired of gluing toothpicks into a worn screw hole. This becomes an issue if you ever have repeated water in fuel issues from a poor marina tank. Here is what I'm considering.

Failure = simple corrosion. The next pump will be the type to plug in a new motor and done.

Two wires are used. Red is cut off at the wire gland. Pump was made on a Friday afternoon with stock on hand.

Yes the red wire goes into the pump. I'll take the pump apart and have a look. Good idea.

I bought the pump in 2014, no paperwork but I did download a pdf. I only insured the two wires worked, and the red wire didn't work with either the bro or blk. I'll have to see if there is a light in the livewell. Good suggestion, I had to retreat as the day got too hot. I give up in the...

Well, brown to brown and black to black works fine. I've no idea where the red wire goes on the original wiring. Slapped Deutch connectors on for the next easy replacement.

I went to replace my live bait pump on my 2007 Marlin and found my new pump has two wires while the old pump had 3. What is that third wire for? Will it harm the switch or whatever to use the two wire? Here are side decals.

I was very happy to get a new GPS cable into my display. The original cables had been cut and joined above the support. That worked great for so many years but I didn't want to cut the new cable. I used WD40 to get the old cables slick as they had grunge on them. It was a bug tussle but I got...

Also, boats out of Astoria, OR or Ilwaco, WA are scoring big numbers of albacore. I've heard 40-60 fish is not unreasonable. Only limited by ice.