Search results

Hi guys, There is a string under General discussion on the T-stat housing corrosion issue and countermeasures. Here is one of my posts on the subject last Feb. I am happy to say - that when inspected for this years winterization and service (Nov 15, 2015) - both motor T-stat housings were...

Hi all, Thought I would pass along this little modification. Most dockages are bow in. Stepping over rail is an issue. Added two hinges to the bowrail. Got them from Rail Makers in Costa Mesa CA. Very simple install. Cut rail with a SS pipe cutter, install hinges (tighten set-screw), put cut...

Hi CKJR - I do not think the epoxy will work if the housing is permeated. That was my problem. They pulled the PH, and sent out to weld a sleeve. Accurate Marine in Bohemia, NY is where I have my motor's serviced. Call them - 631-589-5502 I have been to the Miami boat show the past two years. I...

Hi all, This is unfortunately another Yamaha issue. Corrosion at the T-stat housing. I have a pair of 2004 F225, 600 hrs. I was "fortunate" in that during my winterization this Nov, the shop I have do my work - knows to look for this. They probe the T-stat housing for corrosion. If the wall is...

oceanbean Ed current GW: 2004 Sailfish 282 Yamaha 2004 F225 previous GW 1993 Explorer 245 I/O VP 290 DP

Thanks for forwarding the info. I have also contacted the law firm. I had both 2004 F225's done. I did submit all info to BoatUS as well, might as well work it from all angles. This is our best shot. Please encourage all that have experienced this problem and shelled big bucks for no fault of...

Hi all, Just had both of mine done. 2004 F225 436 hours. Starboard was worse than Port. Fortunately being aware of the problem I knew what to look for and address before oil pan was compromised. If that happens the outcome is not good. Went for complete mid sections, oil pans, oil pumps, all...

Thanks guys. I'll try those places. best regards, Oceanbean.

Anyone have experience with the GloMate stove that comes on the Grady's. Mine has a GM -1000. Never used it, but want to. Where can one get the butane fuel canisters? thanks, Oceanbean 2004 GW 282

Hi, I just replaced mine with stainless steel ball socket end fittings. The OEM is Ameritool Sweet upgrade from the plastic. go to www.lewismarine.com. or call 772-286-2118 ask for Linda you are looking for part no. EF Stainless Steel Ball Socket Fitting thread M-6 metric They list for...

Yes - dealer hauled the boat, put it inside, dropped both lower units and my tech scoped them with their service manager observing. It cost me $300 plus lunch I suggest you write this into your contract. Offer is good based on survey and engine inspection. Everything is negotiable. The dealer I...

Hi Seasick, I went through a similar purchase last April. I purchased a 2004 282 with 225 F225, 240hrs. I researched the corrosion issue in depth. Even visited with a certified Yamaha tech to see and learn about the problem first hand. I learned that the issue is real for 2005 and earlier...

Hi all, Just wondering if anyone has any experience or recommendations for boat jack stands for a 282 Sailfish. What sizes? How many? Are they better than just blocking the boat? The boat will be in my driveway for the winter. thanks, Oceanbean 2004 GW 282 w/225F

Hi Glen, Welcome to the Great Grady site. The boat you are asking about is my boat. You can read my posts over the years as well as others with I/O's. We tend to all chime in on I/O topics. You will get a feel for what I have be telling you about my boat. There is also a nice photo of it in...

Re: Concerned about F225 exhaust corrosion and oil seal prob Thank you guys. I'm doing exactly what Grady678 suggests. Lower units are being dropped and exhaust housing are being scoped by an experienced Yamaha tech that has done many of these. Word is - fairly common on 01-03 F225's, hit or...

Hi all, Looking at a 2004 GW with F225's model year 04 too. Low hours. Plenty of posts out there including on this site concerning the exhaust corrosion problem. There seems to be another problem with crank case oil seals. Motors ran great during sea trial. They meet all performance specs and...

As I mentioned I had Eli Laminates in Oakdale recore my tank panel. Eli did a great job. It is back in place and is rock solid. The deck feels like a new boat. I am replacing all deck plates as well. It cost a few bucks, but I just don't have the time nor heated garage to do it myself. Hat's off...

I am having mine done this week by Eli Laminates in Oakdale. I'll let you know how it turns out. My boat is a 93 Explorer. Oceanbean 93 Explorer 245

I have a 1993 Explorer with a 5.7L VP DP. The Explorer is slightly narrower and shorter than the Sailfish of that year. As such you will see small blocks (350's) in the Explorer's and Big Blocks (454's or twin small blocks) in the Sailfish. At 3000 rpm, I burn 10-12 gph (depending on load and...

Hi Greylock, I too have a V/P I/O. I keep the boat in the water in a 60 slip marina from May to Nov. Shore power is available, several larger boats are plugged in. My V/P is a 1993 D/P. Drive is original, motor repowered in 04. I have zincs on the prop shaft and transom shield. New zincs are...