Search results

1) Your screen name = Jeff Mauro 2) Your first name Jeff 3) Year and Model of your Grady 2009 330 Express 4) Year and make of your engine (engines) Yamaha 350

I own a 2009 330 Express, great Boat!! I am puzzled however by "rust" bleed coming out from under most of the side "thru-hull" fittings. All the thru hulls on 2009 models are 100% stainless steel. Looking from inside it appears that the nuts and washers are SS as well. There is also, no...

I actually did this to my 2003 282 sailfish the first year I owned it, after suffering with your dilemma for a few weeks. . I also drilled a about 4 of 1/8 inch holes up the drain tube. This has worked great for me for 6 years. I moved up to a 2009 this past summer. I think you will be...

I cut the drain tube down about two - three inches. Carefully remove top Screen and put back on cut tube with PVC pipe glue. There is still plenty of water to support live bait

I have had the plastic Tee connectors crack located by the hot water heater on my 2003 Sailfish

I built a nice seat which was removable for a 28 sailfish. Don't know if it fit in your boat. I can email pix if you like

Trailer Great boat trailer combo. What was the model number of the trailer. I am interested in pruchasing a trailer for my 09 330

Small Craft A "Small Craft" is any craft that does not need to be out at sea during the warning period.

Rod holders Guys, Thanks for the input. i think I'll hold off on this idea. JP

Folks I have seen a number of 330 Express fitted with Rod holders on the aft of the Fishbox. Any idea on how the are mounted with out compromising the fish box wall? Thanks

To my surprise one 350 Yamaha on an 2009 330 would not maintain planning speed. If this happens, check fuel line near Engine Cowl front hold down clamp. It must be positioned to rear of the assembly. Otherwise, when putting cowl back on, it will crimp, allowing enough gas for start and idle...