Search results

The hull warranty is 5 years I believe others can confirm. For warranty service it does need to be done at a GW dealer.

Buying a used 2006 Grady Sailfish 282 so next year I and fishing and not doing yard work.

Great generator we have about six of them for work to power radio gear at towers. Not one has given us an issue and they all start on the on a pull or 3 each time. They are rock solid and we just got a EU6500 because the others were so great. Go right to northern tool and order the aux fuel...

Depends on the model and the year. Most support it now.

As they will no doubt tell me on another forum I frequent now "I drank the kool aid." Made an offer and it was accepted on a '06 Sailfish 282 with twin Yamaha F225s. Next up is the survey and sea trial hopefully this week. I will take all the advice out there on what to look for. I hope some...

I ran the calc. myself and it looks like the trailer is too small. I got about 10,600 lb for the fully outfitted weight. Also it does have the pulpit. According to the specs centerline length is 28 ft and the trailer is also only rated up to 27 ft. So I think the previous poster it correct...

I will mostly be using it to store over the winter. So in an out twice a year. Maybe the occasional haul to bring her over to the bay side of the cape or somewhere else. I will have to haul her home about 130 miles and back twice a year for the storage on mostly highway over 80% of the ride...

I spoke to the dealer and they said no issue with a Grady being stored on a roller trailer. I remember some posts I have read about bunk trailers being better then rollers for storage. Spreads the load over more area. Of course he has a load rite roller he wants to sell me. The model is a...

For damage in the engine arena I found the bolt below to have gel coat crack around it. Is this a big concern? Also the have chipped one of the skegs should this decrease the price.

Good news is the only thru hull not factory done is the transducer and there were no aftermarket holes in the transom.

Close to making a deal but need some help on a few items. The boat has been neglected and I have attached some photos. A lot of scum on it but around the thruhulls there is staining. Any chance of cleaning this up and how hard will it be. The boat really is a mess from a care perspective...

I here you on the wood being used in boats look at Old Iron Sides (USS Constitution) Still around from the revolution. I got spoke by doing too much research I think. A good quailty inspection with the right tools from a good surveyor seems to be the trick and a recurring theme on used...

Few more pics

]I went out to look at the boat today. I took some pictures of the rear bilge area. To my untrained eye things seemed to be good here. I noticed that the motor bolts appear to be fine with no sinking or leaking goop.

Thanks for the reply. I went out to look at her today and I had your same thought about my kids. Much better then the sailfish 2660 I was looking at for them. Also alot more room. What a great boat. I never had a wood problem until all the threads I read at hull truth but after looking at...

This is a repost of my question over @ Hull Truth. It was recommended that I post it here too. I know I am probably opening a big can of worms and especially being newer to the forum. But I would like some comments and advice on buying a newer used Sailfish 282 say year 2005 or newer. Have my...

This is a repost of my question over @ Hull Truth. It was recommended that I post it here too. I know I am probably opening a big can of worms and especially being newer to the forum. But I would like some comments and advice on buying a newer used Sailfish 282 say year 2005 or newer. Have my...