Search results

Mine is after separator. In the splash well. Don't think it really matters. But if its after separator less chances of stuff getting into the bulb. Crud, water, phase separation, hum bug, etc.... and if its in splash well easier to get to it. Where is it located currently in the boat? and where...

Last day today for CnR. And the weather is awful.

I try to fish every time I go out on my boat.....

How do you steer the kicker?

Interesting..... it looks great.

The boat looks great! Did you replace the rub rail? It looks brand new.

For what's its worth. I've got a 208 with a f150. I tried a 4 blade prop 2 pitches lower than I had. Did not like it. Lost 6 mph and lost 5,000 rpms on the top end. I did get on plane quicker but not enough for me to justify. Stayed on plane at slightly lower rpms but not a big difference from...

I have a 2006 208 with a F150. About 100 pounds lighter. I do not have an issue with water. Even with two 200 pound guys fishing off stern with all there gear. It will take some time to drain out of the corners if I clean the deck with water but nothing out of the ordinary. I also have the...

Happy New year. I am curious about the stick it anchor pin motor mount. I plan on purchasing one. Do you have a pic of the install?

Actually saw the F200 repower data on another site. Check this https://www.thehulltruth.com/boating-forum/486181-grady-white-208-yamaha-repower-i4-f200-performance-s-pg-6-a.html

When or if I repower. I believe I would go for the 250. I dont think there is much if any weight difference between the 225 and 250. And around 100 pounds difference between the 200 and 250. Cost difference is roughly 4k from 200 to 250. If that is a factor. I also recall a thread on here...

Following. We have the same boat. How many hours on the f150? I believe 230 is the max hp for our 2006 model 208. So the choice is most likely between a 4 cylinder 200 hp and a 225 hp 6 cylinder?

Locatiin is on the Chesapeake Bay. Yes I have trim tabs. Seasick.... Current prop is 13.75 diameter 17 pitch. I am happy with current prop. Looking for a slightly higher wot rpm. To avoid lugging the motor. I tried a 4 blade but could only get 5100 rpms and at low rpms it vibrated terribly. I am...

Thanks for reply. You have a 15 pitch prop. I believe the same prop as mine but I have a 17 pitch prop. It appears a 15 pitch may be a little better for me.

I've got a 2006 Grady 208 with a F150. I have the yamaha stock 17m prop. It is a 13 3/4 diameter and 17 pitch prop. Current WOT is 5500 rpm and 36mph. I'm thinking of trying a new prop. Perhaps a 15 pitch. Curious what everyone else is using? From my research I believe WOT rpm closer to 6,000...

Nice looking boat. I have the exact same boat.

I've got a grady 208 with bimini and vinyl enclosure. Does anyone trailer boat with the vinyl enclosure installed? I would be trailering from my house to ramp at max 55 mph. boat ramp is about 10 minutes away. I don't see it being an issue. If I'm on the water I'm running 35 mph with it up. Just...

I have a 208 with a f150. I added a radar arch to mine this past winter. I have seen no noticeable difference in engine performance. But for fishing performance I do have 10 more rod holders now.....

Somebody ran into my boat over the weekend. I have some gelcoat and possibly fiberglass repairs needed. Does anyone recommend anybody from Annapolis to Solomons that can handle this?

I assume these are supposed to be a push to reset breaker?