Search results

Hey Skunk. How deep for Seabass this time of year? Asking for a friend.lol,

Is the deck just screwed in like all the other Grady White boats? I have the same model and replaced fuel tanks. No cutting of decks at all.

I did mine last year. 86 sailfish. SP Sheetmetal in Dennisville made my tank. I am in west wildwood. Contact me if you need anything.Drew Ryan

I repowered a 86 Sailfish with a 300 G2 Etec. Much better boat without all the weight in the back.

I replaced a 125 tank on a 25 sailfish. Make sure tank is near empty or empty. Came out easily by myself.

In March I used SP Sheetmetal in Cape May Court house NJ. On time , Fair price and local to me.

Hi. I repowered my 25 Sailfish cutout transom from twin 200 07 etecs to a G2 300 Evinrude. My main concern was to much weight in the back of the boat.I think the boat is better balanced and performs to my liking. Cruise speed is 25 to 27 knots depending on conditions. The 350 Yamaha should work...

US Navy. 1977-1981. Subbase Pearl Harbor Radiological Controls. USS Cimmaron AO 177 . MM2. Great experience in my young life.

1986 Sailfish . Re powered in 2018 with single 300 G2 Evinrude.

i would be interested in . boat and house in West Wildwood.

i made that switch in the spring. Went from twin 07 200 etecs to a single 300 G2 . there were no issues on the installation. 25 sailfish with cut out transom . its a better balanced boat with all the weight gone from the back of the boat. gets up on plan easily . sweet spot is 4650/4700 at 27mph...

ok the wait is over. the new motor G2 300 hp Evinrude installation is complete and did a test run today. wot around 5600 to 5700 at 37 mph for 1.4 to 1.5 . at 4500 rpm at 31 mph for 2.4 to 2.5 . boat holds 200 gals and had about 100 onboard with 2 persons onboard. can watch a nice vidio on...

Hey Guys. I am re powering my 25 sailfish to a single 300 Evinrude G2. should be ready to go in March.I plan on posting the results of the sea trial on my post from the fall . Less weight ,less moving parts , great warranty and great dealer support here in south jersey. whats not to like. Drew Ryan

thanks for the info Drew Ryan

yep. my dealer has the same setup . 23 gulphstream with the 300 G2. are you getting the same numbers 4200 rpm 29 mph at 2.5 mpg? gw 25 posted some numbers for a 25 sailfish which is a little less than the 23 is getting. i can diffently live with 3800 to 4100 at 25mph at 2,0 mpg and a 10 year...

update on this repower. sold the twin 200 etecs and put a down payment on a 2018 300 G2. should be ready for the sea trial some time in April. will post pictures and comments during the repower when they start in march 2018

good luck with the re build

also i think 2 strokes might be a better choice as i think you would get up on plane faster. i am also considering a repower with a 300 G2 etec. still looking into that

good morning. i have the the same boat and year as you. i would be cautious of weight with those motors. i have 200 etecs on mine . when the aux[aft] tank is full and with the weight of the motors its heavy in the back. i only fill the aux tank when running offshore. i counter the weight in the...

thank you gw255 for the reply. what rpm are you running at cruise? i can live with 25 mph . are you still using both fuel tanks ? thanks to both responders for your replys . they are very helpful Drew Ryan