Search results

Got a 99 Marlin i repowered with DF250s last year. Under 50 hrs thus far, but really like em. Any questions let me know

access thru the mid bunk, port side, near the heater on mine

its a Norcold. It has a thermostat/switch inside. It does not start in any position.

Pulled it out yesterday and sure enough, the voltage was there. Any hope of having this troubleshot by a appliance person? these babies are expensive as heck, new.?

I haven't started troubleshooting it yet, but my 99 Marlin fridge seems to be down. I didn't use it last year (on mooring)...so questions: 1) is this a dc powered unit only (I only have dc breaker for it). 2) any troubleshooting/removal advice?...other than checking for power to the unit 3) if...

Thanks for the info folks.....while we're at it, on the fuel tank switchover valves...the little end (pointy) is the direction of the valve setting correct?

ok -thx

Stupid question....first full year with the boat starting soon. Which is the aux tank and which is the main and what are their capacities? I mean which is forward and which is aft (including the fuel fills). Thanks 1999 Marlin

Mine has succumbed to complete saltwater corrosions. Anybody know of OEM or aftermarket replacements (I am cheap!)

haven't tried anything yet, just didnt want to make more of a mess....if thats possible!

Of course while taking out the steering RAM I am replacing, I spilled fluid all over the engine well. Any advice for cleaning? My local mechanic says a strong commercial cleaner...simple green type....will do the job, but then again, his boat is a mess!

Repowered last year, the rigger recommended bypassing the electric primers and going with bulbs. We did and so far so good.

I have a 1999, no ac, no generator . I do have a honda E2000 to strap on the transom. I spent most of my first summer (last summer) in repower mode, so did not to sleep on her yet. I will do mainly mooring sleepovers as well. I have a couple fans that will hopefully help out with the heat.

Thanks Dennis -sounds good, I will try it.

I have a chipped live well hatch cover. I've read a lot about patching/re-building hatch covers chips here in the forums...my head is spinning. Poly-fair, 3M epoxy with filler, fiberglass filler and resin, and many other recommendations. I have a history of screwing up Marine Tex and other...

The older I get, the MORE I HATE SNOW!

Point taken folks - plenty of other tasks I guess...55 degrees is a long way off here in New England

Whats the min. temp. to start polishing/waxing my hull? (the older I get, the more hyper I get about next year and getting things done....time to roll!)

Drained somewhere in the vicintiy of 150 gals when I winterized my Marlin (dont ask why....but I did anyway). Had a rig I borrowed from my local boatyard....a automotive type fuel pump hooked to a 10 mic filter. Powered the rig with a jump pack. Filled 5-6 gal portable jugs. Used in our cars...

Carbs? OX66's are fuel injected I believe.