Search results

No such noise in my 99 sounds fishy tho

Love my new zuks (albeit they are new). twin 250s on a Marlin....20hrs, great fuel economy

OK - gotta ask. Does all of your recommendations work for Eisenglass (or Isinglass?) as well? I'm sure my enclosure is not strataglass, but cheaper vinyl. I am starting to have some issues and want to clean, polish. Advice?

Can't speak to your model specifically, but it certainly seems like you are running bow down. check your tabs and make sure engines are trimmed properly

Thanks for all the feedback. Some further comments- Its a big boat, I am relying on the Admiral at the bow, so I am seeking an easy, sure, hook-up. I think I will try to fit a complete danforth and rode somewhere in the boat and use if I have any doubts with the CQR. Is there such a device...

T - any concerns about Co2 with the EU? I too have a non-generator Marlin and an EU2000. I have not tried the EU on the boat yet, but am planning to. Do you strap it to the "swim platform"?

Fixed it...it was clogged on the RAW water inlet. I repetitively filled the bowl with fresh clean water and went to fill position (not flush. After about three cycles, it cleared. Thanks

OK - hear you loud and clear. Mine is a nice CQR with swivel. Maybe I can find a place to store a second anchor if I have these problems again. All - whats the correct technique with a CQR? PS - I also read on the horizon windlass, that after stopping the release (down) of the rode, you...

already getting used to it

Horizon 500, just looked it up. I think there is a clutched and non-clutch model. I read the instructions and you are right. That solved. Now, does the spade (and other alternate anchors) fit in the pulpit/roller? Thanks

not too good with pics, but try this. Hope you can blow it up

Dennis - this was after setting the CQR and the boat bobbing in the wind. The windlass and power was off. I heard it dragging out of the anchor locker and had to loop the chain around one of the cleats to make it fast. I see no adjustments on the windlass. I am very disappointed in the...

I agree - alittle confusing and didnt see any notice it was coming - guess we will get used to it. I actually had to re-bookmark the site once I found it again....the old link says "there was a problem"

Stupid question- but where does my electric head gets its water....is it raw (salt) or from the water tank? It stopped working yesterday.

First time using my new (to me) Marlin anchor and windlass. The CQR would not catch the first 4 tries. I would like to replace it. Anyone have another type that fits on the pulpit (fortress, danforth?). Also, the windlass clutch slipped...is there and adjustment on it, I am sure it is the...

Very cool -looks like you hit all the activities. Boat seems to hum with the F225s (always a topic here on the boards). I am very jealous of your sea conditions......here in Buzzards Bay Ma., never less than 3ft chop Great Clip!

Did someone says Zukes? Yep on a Marlin here in SE Mass.

Anyone have experience with the ACR RCL-100. Mine doesn't work. I hear the servo rotating the light, but no illumination. I ordered a couple new halogen bulbs (big bucks), but not sure that's the issue. Can I stick a VOM in the sockets to see if there's juice? If not, there's some relatively...

Fire - sorry I misunderstood your previous post. I am not sure how much different yours are placed vs my Marlins (which are original I believe). I like the idea of re-enforcing underneath them. thx

Yes -same cleat setup as yours. But the two pennants attach forward on the mooring to a single point and the boat flops around behind the single mooring ball. The two pennants take turns rubbing on the underneath of the pulpit. I've never been a fan of pulpits, even tho they look cool and...