Search results

Mine were kept rolled in a king sized pillow case for 12 years and they look like new. I'm keeping the side curtains and foward windshield part in the boat (starboard cabin storage bin) for use in case I get stuck in a bad storm. Came in handy last weekend when it was 68 degrees with the wife...

Thanks for the measurements. Ill go check mine. As for selling it? No way. I've never seen a more pristine 2001 in my life. It looks like a 1-2 year old boat. Maybe in a few years I could sell it for a 27-30 footer with hardtop.

Well the problem is there are two of those shed/canopies. One next to the house my mother parks her SUV under- the boat has to back up through that, then a straight shot into the 28' long one in the back yard. So going taller isn't an option. If the hard top won't work, my parents want to chop...

It's hard to eye ball it from the pics, but it looks like it won't fit to me. I'll need to measure to be sure. If I get a top made- I'm sure I could spec a lower height- I don't need a foot over my head do I? I could forgo the overhead electronics box, etc- I only need it for shade and I can...

I'm interested in putting a hardtop on my 226, but I need to make sure it'll clear under my steel canopy first- my canopy legs are 8' and it goes over 10' in the middle. I'm not sure what the best way to measure it is- but if someone has a hardtop on their 226/228, maybe measure the height from...

1-screen name, zimm 2-your first name, Greg 3-year and model of your boat, 2001 226 Seafarer 4-year and the power that you have on your boat 2001 Yamaha 200 SWS II (OX66)

I filled up my boat two weeks ago. When I uncovered it today, there was yellow gook all over the side from the fuel fill back to the transom. My blue stripe is all eaten, the glue running down. My GRADY-WHITE letters took a hit, but are still sticking for now. What happened? It looks like...

I'm looking to do the same thing. I have 1 perko dome light in my 226. I think it's the 3.5" model. I found an awesome LED array that allows you to switch between red and white lighting with the same switch, but I don't know if it'll fit inside the dome. I'm going to try it out...

Rigging issue. Either a wire problem, dip switch on the gauge, or in the sender. Like posted above- the dealer will take care of it.

I couldn't find an HZ with a 5 amp rating. I think it listed it as obsolete. I looked up the specs and the HT looks like the same thing to me. http://www.mouser.com/ds/2/358/typ_ts-701-16343.pdf I had to replace an accessory breaker because when I bought the boat, the threaded neck was broken...

www.mouser.com This should be the 5 amp one: http://www.mouser.com/Search/Refine.asp ... S-701-HT-5 I picked up a couple 5's and 15's. 693-TS-701-HT-15 MFG Part No:TS-701-HT-15 TS-701-HT-15 693-TS-701-HT-5 MFG Part No:TS-701-HT-5 TS-701-HT-5

Yup, seasick is right. Pull the switch panel out and check with a 12v test light- the kind with an alligator clip on a wire and the probe looks like a screwdriver with a point on it. I bet the breaker is bad. See if there is power going to the breaker. The electrical panel has looped orange...

Did our first ride last weekend. My 2.5 year old loved it, especially that channel markers have numbers and he's learning to count.

Thanks for the info! I was worried the hooks wouldn't fit the stern eyes based on some amazon reviews- but those were for the smaller version.

Kwik Tek Airhead Heavy Duty Tow Harness- it's the one with the yellow with black tracer. Haven't ordered it yet, it's in my Amazon cart. http://www.airhead.com/p/heavy-duty-tow-harness?pp=24 http://www.amazon.com/gp/product/B001MW ... PDKIKX0DER

Anyone run a rear view mirror on their boat? I had them on past boats. Helps out on busy lakes, especially since I'm now in a "slow" boat. I have one with a suction cup, but it won't work with the textured dash. I could bolt one to the windshield, or keep it low behind the cabin hatch.

I found this one- bet it'll work. 16' and oversized clips.

Anyone recommend a high quality bridle to tow a tube or skier from a Grady? I've read that some of the cheaper ones are too short and the clips won't fit around the large stern eyes. Or maybe make my own? Some big stainless clips, amsteel line, and a floating pulley?

Nice. I went with marine beam.com bulbs in warm white. Fit and look great. Same color as stock bulb. Should be pleasant on the eyes at night.

I have the Load Star 550 tires on my trailer. They look like they're really struggling under the light load of my 226. They're only load range C. Yuck. Anyone know how to decipher the DOT code to figure out how old they are? The trailer is an '07, but I wonder how much older than that they...