Search results

Hi GMan25 I know this is a really old thread but in the same situation with my new to me 04 Marlin. Could you repost your photos as they've expired.

Yikes th Yikes thanks for that tip this 04 boat already has enough elec gremlins in it I've been chasing. Rethinking a Lithium 36v solution that's lighter and takes up less space albeit 3x's the $$

Wondering if anyone has tried using three of the four batteries wired in series before? Aside from the risk of drawing them down in theory this should work. I have 4 batteries on my Marlin there is a left and a right bank with a selector on each side for 1, 2 or Both. Looks like the house is...

Thanks Glacier thats exactly it! Question is the $20 Marinco 12VBPS2 the same quality as the $44 Scotty 2127 plug? They look the same to me.

Restoring a 30’ Marlin and happy to find two stern plugs locates up high in the gunnel. Problem is I can’t locate the male plug aide to order. Any idea what brand this is & where to order?

Thanks I am going to sand the whole thing and put 5 plus coats of Epifanes Clear Varnish down. Found a lot of info on how to do it by cutting it 50 - 50 with mineral spirits. Will post the results back here for other's benefits.

I'm interested in what everyone recommends using, your advise and the steps / material I should use to refinish my floor? Is Epiphanes clear varnish the best product? How many coats? after sanding is there anying I could put down first to restore the wood and color? Thanks Mike

Thanks for the tips I pulled the panel cleaned all the connections on both the 120 & 12v sides adding dielectric grease. Found the biggest offender the shore power plug was melted last owner must have been pulling too many amps.

@Bayhouse how did you make out refinishing your floor? Restoring an 04 Marlin and looking for steps and materials to use to get this back in shape. Thanks Mike

Having a hard time finding an exact fit replacement microwave for an 04 Marlin. The old one is a Samsung MW640BA and measures 18 1/8" W x 9 3/4" H x 12 7/8" D. There are many .7 cf Microwaves out there but the hight is the problem as the walk around limits the clearance to under 10". Any...

I’m restoring an 2004 Marlin which has a few electrical gremlins. One of which when hooked to shore power the panel reads around 60-70 volts a/c but if I put a volt meter on any outlet it reads fine at 120v. This is on the shore power side I wont share the generator side issues yet. Thanks for...

I just Purchased an 04 Marlin with a leak on the Port side window over the galley. It must have been leaking for many years as it ran down the window shelf dripped on the microwave rusting it completely and also rusted the Isotherm 49 fridge/frame. Looks like it is coming from the mid bottom...

Hi Magicabill I like your approach and diligence. I just picked up a new to me Marlin with a serious mold problem what dehumidifier have you found to work well in the cabin & helm? Assume it's driven by A/C. Thanks Mike

Great info thanks so much for sharing! As soon as it warms up a bit here in NC I will be trying your approach.

Hi Capt Overkill would you be willing to share your tips to the great grady group on how you removed and applied your trim? Thanks

It Arrived today and I have a buyer for half the roll.Thanks for the interest.

I found several threads about replacing the Vinyl cockpit trim on gradys the source is Barbour Plastics and the link is https://www.integritymarinecorp.com/product-page/f8252 Since they only sell it in 105' lengths would anyone be interested in splitting it with me? The total with shipping to NC...

Is this the same trim that Barbour Marine sells for $2 a ft? unfortunately you have to purchase 105'

In process of purchasing a 2004 Marlin Motors are new 300 yamahas the hull is solid but needs a lot of TLC. Any one have a line on a replacement lid pn 10-947 for the Cutting Board – Stove Top lid? Have a note into Marine Connection Liquidators and will try GW parts but don't have much faith in...

Looking at a 2004 Marlin and the hull side pin striping and decal need to be replaced after some gelcoat repair. I can find the stern hull side decal on EBay but can't seam to find a source for the Navy/Gold stripe. Have you guys found any sources for that?