Search results

Looks great. Planning to do the same thing to my Gulfstream, What color starboard did you use?

I went through this process last spring and sprayed the area down with a soapy water mixture and then applied the stripes. I used a squege to make sure I got all the area pockets out. It was a pretty easy process, just make sure the area is clean of all the old adhesive before starting.

Thanks for all the responses. I'll probably add some oversize fender washers to better distribute the weight and stress. 3rd day- I figured the longer boom (4') would be necessary to clear the transom motor bracket. Lanie- sending you a PM regarding the downriggers.

Here's a 1995 with twin Yamaha 150s for $20,000. Don't know anything about the boat. http://www.sportfishermen.com/board/f29 ... 93285.html

I was able to purchase some last season from my local Grady dealer. I don't remember the exact cost but it was relatively affordable. You need to make sure you tell them them the year of the boat because the spacing between the blue and gold varied among years.

Thinking about adding a downrigger to my Gulfstream this year and I've been looking at the Penn Fathom Masters. I'd like to use the rod holder mounts as opposed to adding a fixed mount base to the gunnels. If I use the rod holder mounts, do I need to add a backer plate or anything else to...

I'm not sure the exact size of the pulpit for a Seafarer but the pulpit for a Gulfstream has an approximate outside overall length of 44 1/4" and an outside overall width of 15 5/8". I'd imagine the Seafarer and Gulfstream pulpits are close in size. Hope this helps.

CBBT stands for Chesapeake Bay Bridge Tunnel. Good luck if you get down there.

I have a 2000 Gulfstream and the freshwater pump is located under the port side helm chair. You will need to remove the two tackle drawers in order to get access to it.

I'm hoping to get some advice on how to resolve a problem that I'm having with the auxillary fuel tank on my 232 Gulfstream. I purchased the boat in March and I'm still learning all the quirks. I recently discovered that the auxillary tank was not venting properly. I removed the gas cap I...

You may want to give Shorts Marine in Longneck, DE a call. They seem to have every part available and if not I'm sure they could get it with short notice. Good luck. Derek

Thanks for the reply. Let me see how I make out this weekend. I'll get back to you if I need some help. Derek

Looking to add a few more rod holders to my 2000 Gulfstream. Does anyone have any recommendations? I'm leaning towards Lee's but open to suggestions. Also, does anyone know the diameter of the supports for the hardtop? Thanks.

I had been Gradyless for over 17 months and that all ended yesterday :D . I bought a 2000 Gulfstream with twin 150 Yamahas. I bought the boat in NC and it was delivered to MD yesterday. This is my first boat with twins so I look forward to seeing how the boat handles compared to everything I...

Give Short's Marine a call. They are in Millsboro, DE and will usually talk you through any problems that may occur during a do it yourself repair. They've been great to deal with.

Sorry it's taken me a few days to get back to you but the # for Jim's Marine Service is 410-213-7579. Hope that helps.

I had a fiberglass repair done a few years ago in OC. I used Jim's Marine Services (I believe he is West OC). I'll try to find a number for you. He did a great job.

Nice looking boat. Looks like a canal full of Gradys. Where do you keep your boat? We have a place off of 94th Street. Unfortunately, it's boatless for now (looking for a Gulfstream). See you at the shop in the spring. Derek

Denny, I've spoken to you several times at Oyster Bay and I'm always looking for someone to fish with. Right now I'm boatless but hopefully things change by next season. Next time I'm down the beach, I'll stop by the store to see if you're working. Derek

Pete, Thanks for the feedback. It looks like you've done alot with your Gulfstream. By the way, your boat used to be docked right up the canal from me in OC, MD.