Search results

I just realized I accidentally posted this in tne photo section, if a admin can move it that would be great Any drivers at the dealer would need a CDL, they are for commerce. It’s the private owner moving their own boat which is in question.

Looking for actual first hand experience here Wondering if anyone has been cited for not having a CDL towing their 26,001+ combined weight truck/trailer. Everything I read in regulations and publications say I DO NOT need a CDL where I am not towing for commerce, if I chartered different...

Bayside Marine in Duxbury, MA has one listed for a fair price on their site. I have no affiliation but saw it recently listed and sent to a friend.

I usually remove all spark plugs, spray a generous amount of fogging oil into each cylinder, put plugs back and crank engine a few times with emergency lanyard pulled so they do not start.

Assuming 2 strokes, even compression around 110-120psi and all cylinders within 10% on each motor, look at the plugs when you take them off and they should all look the same. Going for a ride if you can and making sure they do not hesitate and come up to full RPMs, 5500+/-. If you buy it with...

Someone on one of the Grady FB groups was going back and forth with Sealskin for a cover that would work, the first attempt was too short. For the $300 I am happy enough with this cover and hope I get 2 or maybe 3 years out of it.

Every time I u wrapped our old 272 I was never impressed with how much cleaning I still had to do, even after going away clean. Maybe the guy I was using could have made it tighter and more vents, but either way we didn’t really want to go that route. Also when the bot was stored on Cape Cod it...

We used to shrink wrap the boat, but I was honestly not impressed with how dirty the boat always was after I uncovered it. Also I am not a tree hugger by any stretch, but the volume of plastic from just one boat seemed sinful. We did a giant blue tarp a few times that worked ok, but the fit...

We were not exactly sure how to do our ac this year and this was very helpful. I ended up just putting a cut off funnel over the sea strainer and it pushed all the water out and I added some pink antifreeze to the funnel and forced it through with the shop vac, worked great!

The line I was referring to was the line from the tank to the pump. Even that line would typically have little water in it, but on my sailfish it was easy enough to put a little antifreeze down there while it was disconnected anyways.

I had a 1999 272. To winterize I would bypass the water heater and drained it, since I never used it I left it that was all year. I would run the tank empty and then made a pickup adaptor for the water pump and pumped RV antifreeze through the system, should only take 1, maybe 2 gallons tops...

We have been buying, fixing up, and selling boats for 10+ years and finally found the one that we are going to keep! We were looking for a Marlin, but this was top of our budget, newer, and nicer than we ever planned on. Have a few small things to address but we are excited for next year! 2009...

Most of those parts are replaceable. Probably fairly economical to replace if you are doing it yourself, if you have to bring it to a shop you might want to compare the cost of a new trailer.

Fran's charged us $800 to repair a section of deck that was not a removable hatch, I would imagine a hatch cover that you can bring to his shop without the boat would be even easier. I know at the time he was saying how his materials costs was all over the place and changing every day. He has...

Fran's Fiberglass in Uxbridge, Ma. Very small shop but he fixed a section of floor on our 180 and very happy with results and very fair on price.

I will post some tomorrow when I’m near the boat.

Possibly looking to sell my 2001 Grady 18' Sportsman. Yamaha 115hp four stroke with 650ish hours. 7" Garmin touch screen, roller trailer in very good condition, bimini top, 4 blade SS Powertech prop, and brand new canvas cover. Boat is located in Ashland, MA. $17,000obo Andrew 774-244-two...

I was looking at AllStar Trailers in Florida but shipping it to New England made it little different to a local Load-Rite. If you could do local pickup their prices were good. Looks like their website is down right now though

As an update, we did go down and look at the boat. Phil was great and they seemed like a great dealer that really cares about their customers. We were not ready to make an offer on the boat we saw, but we will defiantly be keeping it in mind Andrew

Can anyone recommend a Yamaha and hull surveyor in CT? I called a few and no-one seems to do both. I would like the mid sections of a pair of 225's scoped and a structural hull survey done. I have not looked at the boat yet but I am hoping to get an idea on a timeline and their process...