Search results

I had this issue a few years ago and it was a small strainer on the fresh water. My 2018 306 has a little strainer near the fresh water pump. Mine is behind the lower hatch inside the console. It simply unscrews for cleaning.

there is a tuner called NIZPRO that tunes them. Personally, I wouldn't do it.

I think you are in the ballpark, but perhaps more-so in the parking lot.

I have replaced a bunch of my 2018 306 Canyon. Pretty simple once you access them. I used a needlenose piers and screwdriver to pull/pry the old one out the hose after lossening the hose clamp. Installation is simply the reverse. On my tackle station, I had removed my tackle drawers and frame...

Will do.. I would even be willing to ship one to you, but I doubt it would be cost effective...lol

There are also two 226 models for sale on Craiglist Boston Boats

Not a mid 90s...but well below your budget. https://boston.craigslist.org/sob/boa/d/plymouth-grady-white-seafarer/7861684855.html

I have not been able to find just the rubber insert. My local NAPA was able to order one for me (Chris...see link below), but it was the wrong width. The one from NAPA was 8 MM and the blade on my boat is 6 MM. I just ordered these. I will report back if they fit/work...

Hi, Here are two pics. One is of where the blade connects to the arm. At the bottom, you will see two little "balls". These are where the water squirts out. They can be positioned/repositioned by putting a pin or something in the hole to move the ball. The second pic is a close up. There are...

ok Now, all I need to do is remember to take a picture when I am at the boat tonight.

I can send a picture of the washer on my single arem wiper, if that is what you are looking for.....

I added a drain hole...but thx

Hi, I made a bow cover, so I can leave my cushions out, but have then procected (95% or so) from the elements (sun, rain, dirt) and not cluttering up my console. I used NYLON webbing to the front and mid-cleats and two self adhesive snaps (SNAD fasteners; I hate screwing snaps into the boat)...

Are you asking about real Teak or EVA simulated Teak?

Nice!

"Probably a dumb decision putting this much money into a 20 year old boat." Nope; not at all, if the boat is in good shape....go price a new one...LOL

I have a 306 Canyon, which is the same hull as the 307. The boat is very stable at anchor and in the drift. It runs very well in most seas. Like most any other "small" boat, once the seas are past 3 - 4 at close periods, it's time to either slow way down or not leave the dock. There is lots of...

Go to your local discount store (Ocean State Job Lot, Big Lots, etc.) and buy a front door mat. Screw it down to the dock. Hose it offf frequently.

Hi, Did you trying going via the fold-down panel on the transom behind the folding bench seat?

It's highly dependent on the level of oxidation. For light oxidation, I like Meguiars One-Step Cleaner Wax followed by Collinite Liquid 925 wax. I then use 303 Speed Detailer throughout the season and between waxing. I use these by hand only. If I wanted to bring a boat back from all but the...