Search results

Looks good

if you remove the 4 screw in and lift out the switch panel and look the acc see if there anything connected to them. if not you can use it as a switch, I believe there a push on push off type breaker, they should have a amp size printed on it somewhere . what amp load is the lights. it's been a...

My 1994 pump in in the tank. . not sure if they move it , but look under the rear berth deck panels and the tank should be there. It's a messy job working on the pump.

https://www.seaviewglobal.com/collections/modular-mounts/products/modular-dual-mounts?variant=12309278457954 this is the radar mount, but i build a 12" box to raise it for better radar operation . added the wing and flir top mount.

Welcome aboard

Tows great stopping is the trouble, boat like to show its weight pushing this little 2500 diesel around.

I'm looking at getting a wireless tether switch for my boat, I know its not good practice to step away from the helm while the boat is in motion, but occasionally happens for one reason or another. So I was wondering if anyone else haves one and different options, there is on this type of item.

my boat was hardtopless when I bought it, loved the boat and added the hardtop later, and added a glass windshield. There are many good custom hardtop builders out there. Not sure where you live but shop around and you'll find someone.

should look like this

I did get a Airmar, it sits in a tank filled with anti- freeze, can't wait to see how it works

I would use a good marine grade ply. I use starboard on a few thing and it tough stuff, but ending up cracking and splitting from the screw holes. But it might work great in that fabrication,as long as you don't pound on your boat offshore. post some pictures , be nice to see what you do.

whats the pump look like? if it doesn't work at all the pump might have stuff stuck in it. have you try hitting it with a water hose to see if the water cleans out the stoppage? I have a older boat, but my pump just snaps out with two plastic clips, and then the hose and wire have to be...

I just picked up a in hull transducer , have you looked at them. Mounts inside the boat. Many advantages , nothing to hook lines and stuff on. No holes. Mounts from the inside. Just an thought .

I'm looking at getting an Raymarine cp 470 chirp unit and was wondering if any on one here haves one. I would like to know how they work? What Transducer to get? And what you thinks of the unit? Any input would be great. Well I picked it up today and ended up getting an M265LM transducer...

I just found led replacement bulbs to replace the stuff on my sailfish, they work great but are experiences .

I have the same trouble with my sailfish, I've try cranking it as tight as I could, go super slow up the ramp. Even had the weld break on the trailer post, trying to crank it on after it on land, so whatever I do it moves. I have a bunk trailer so once it on the trailer it will not move at all...

look at the back side of the switch and see if anything is hooked to it.

Very Nice

If it's screwed in they will be under the center strip,push up on the center and see if there are screw hide under it, or if the center pops off.