Search results

I have a 2022 Grady White 235 freedom. Anyone had any issues with the 100amp circuit breaker in the aft battery locker continuously tripping and/or not resetting at all? I believe the breaker is for the battery isolator. When the breaker is tripped, I do not notice anything else turning off or...

Thanks Tiki...

Tiki...-- thanks for the comment. I'm not at the boat right now, but where are the 2 screws on that side panel. As I recall there is a USB port and a draining hose for cups there. I assume the cable and hoses are long enough so that I do not have to worry of popping them when I pull the panel...

Thanks Steve-O. Yes, I would imagine 2 on the hardtop would be deliver great sound. Can you hear the music pretty well even while moving at a good speed? How did you pop off the center almond color housing that the hardtop lights were in so you can snake the speaker wires around that you...

Thanks for responding and the information. May go with the 10” or 12”. It’s good to know that it makes a difference. The sounds seems to be lacking without additional sound closer to the helm.

Hello all, does anyone know the depth between the hull and inner shell near captains chair of a 2020-present grady white 235 freedom? Right below the starboard side cup holder. Trying to figure out can a 12” fusion signature series 3i sub fit there. The dimensions of the sub is 14.02" x 10"...

Hi all, I have a new 2022 GW 235 freedom. I currently have four 6.6" Fusion signature series 3 sport speakers (2 at Bow-Zone 1, 2 near Aft on either side where the horizontal fishing rod holders are-- Zone 2) coming off of a Fusion Apollo RA770 (port side) and wired remote ( NRX300--StarBD...

I’m trying to access the starboard tubing that currently supplies antennae cable, so I can drop Garmin radar power/network cables through along with GPS 24xd cable. I want to remove the almond color cockpit light panel from my 2022 grady white 235 hardtop. Anyone know how to remove it so I can...

Thanks for the advice everyone. We are talking about a GW 235. Any hints in snaking the cables through from hardtop into helm are welcomed.

For those of you who ran the power cable through the starboard tubing, how did you get access to it. I have been told that I will need to unscrew the top and bottom of the tubing to get access; thus drilling through the hardtop from the starboard side above the tube. I thought I could take off...

Thanks for mentioning the transducer. I am assuming the transducer is powered off whenever the boat is turned off and/or the battery selector is turned to the off position. I need to find how to turn it off and on in the menus on my 1243xsv just in case.

I looked at my manual, and it does not give a wire diagram. I will need to do one myself. From hearing from others here, it sounds like these are the following options that will be effective without much power drop or hazardous. Is this right? 1) that if I do put a second fuse panel, then...

On my switch panel I do have some Aux switches that are there for expansion; however, in the fuse panel, each of the slots are filled. I do like the idea of maybe adding a 2nd fuse panel beside it like the existing fuse panel for future expansion. Does anyone see any issues with me placing...

I’m planning to install the Garmin fantom and a heading sensor. I’m new to wiring on boats, but not in homes. I see on my panel (bluesea system -12) that each slot is taken up besides on the side near the negative. I’m wondering where to hook up the radar power cord (with the inline 7.5A fuse)...

Great info! So it sounds like if I want to utilize MARPA, go with MSC10. Anyone have a pic where they mounted their MSC10? If MARPA is not a concern but want good heading, go with the 24xd instead of 9axis.

The 24xd seems middle of the road and have flexibility to place on top of hardtop, on bow, or maybe even in locker as long as it’s not close to magnets. Have you used the steady cast prior to the 24xd and notice any major difference?

Hi all, I am planning to install a Garmin fantom 24x with hinge mount on a 2022- GW235. I have read that having a heading sensor would be ideal to have overlay on chart. Where on the GW235 should I place the sensor? Does it have to go on the bow or can I place it in storage seating on either...

Wicky, did you use one 36V lithium battery (if so, which one?) or #3 - 12V batteries in the seat storage in front of the helm console? Did you place a quick release puck and/or motor plug receptacle? Do you mind sharing a photo of your setup? What made you decide on the Minn Kota vs Rhodan...

Lots of variables to consider for sure. I've been in 3.5 ft before by accident. I like to play it safe, so I'm thinking 2.5- 3ft tops for me.

Thank you. I do like the hinge method if they do not make a shorter radar dome.