Search results

I have 3 on my 272, all 4 bolt with backing plate. I made sure the core was dry, sealed the top and bottom with marine grade caulk and have had 3 years and all types of fish from giant bluefin to sharks on them with no signs of stress or fatigue on the gunwales. Make sure when they are installed...

If you’re still looking and interested in a repower candidate, I’m considering selling my 2000 272 sailfish as is (just had the port engine die and initial diagnosis is water leak in the power head waiting for haulout to get final diagnosis). Can let it go at a price where a repower to new...

Poppet valve. I did the same thing with mine resealing the lower and replacing the water pump, it didn’t resolve it (although I needed to do it), also replaced all thermostats with no luck. I replaced the poppet valve this winter and it fixed it.

I currently have a 2000 sailfish 272. The good, great layout, great compromise for fishing and beach days, lots of great aspects. The bad… wiring from the factory is standard copper wire, and eventually no matter how good of condition it was kept it needs a full rewire to tinned marine grade...

Mines a little big for those spots unfortunately but I have them a try. Hard to see the size relative in the picture but it takes up one entire side either helm or passenger side from floor to just under my knees and from the cup holder spot out to the aisle

The door on my cabin is tight, after a couple minutes of forcing and pivoting I decided not to bring it below in fear of not getting it out. My friends ‘99 272 has a slightly wider door and it’d work with that setup but mines just too tight to get below unfortunately

That’s what I was afraid of. I had a hard case but was told by Grady dont mount on the roof under any circumstances so didn’t but should have stuck with that one

Any tips on where/how to store a valise raft on a sailfish 272 so it’s accessible but kept dry? First year with one and testing different spots before I’m launched there isn’t a great place out of the way but also accessible. Any insight appreciated.

Here’s mine, I have 3 of these all in similar condition. Let me know if you want them, I replaced mine with deep 0* swivel holders for tuna which sounds like what you’re going to be taking out. If you’re interested I’d consider trading if they are lee 0* swivel rod holders

That should work perfect. Shoot me a PM if you’d like and we can discuss price/pickup

Thanks for the tip just called and left a message for them

Sorry didn’t mean to take away from the original responder. Mine came off a 2000 Grady white sailfish 272. Will be able to get pics/measurements later this week if you’re interested and the previous one doesn’t work out.

Looking for a marine electrician somewhere on the Seacoast NH or southern ME. Long story short, was putting off a full rewire until next winter but after getting a transducer installed I’ve run into some issues with loose switch panel wires (I’ve replaced a handful myself but these are more...

I’ve replaced 3/4 of my stock Grady ones with swivels and have the original (2000 models) available. I’d let them go for $75/piece.

Sorry just seeing this. Looks like it will work but do you have specs (intake valve size and if it’s male/female?, outflow size same questions?, voltage and amperage?)? PM me I’ll share contact information and give you a call to confirm if it’ll work

Sorry quality of pic is bad. Specs: Dayton model: 1P808A 115v 60HZ 1.5amp thermally protected

Looking for a replacement pump to run my AC off raw water. Dayton pumps no longer in business so looking for something with same voltage, input/output plumbing size and ignition safe as it’s located in forward bilge. Haven’t had any luck online or at local New England stores, any help/insight...

I have a 2000 sailfish 272 and am out of NH/southern ME. If you’re interested I have a great Yamaha mechanic that’s mobile and can survey the engines for you. My previous boat had a 2002 F225, he did the engine survey when I bought and sold and I had him scope and do the exhaust kit before I...

Congrats, that’s the type of day I haven’t had in years. I’m heading out Friday to try a few spots with some friends. Seems like it’ll be decent Friday hope to get into the fish. I usually use jigs but we are going to try dropper rigs and clams since that’s what it seems like most folks are...

Will do, forgot to take some today but will be back at the boat Thursday to get some. Basically the sailfish 272 has a small circular handle with a key ring on the bottom (in water) side. So when you pull the handle up the small “key ring” digs into the hatch a little. If you use it a lot it...